CE 60 Grout reviver for wall and floor
Easy apply with sponge tube
Properties
- Full set to refresh or recolour of grouts
- Very high covering power, easy and fast application
- Dirt and water resistant
- For wall and floor, indoor
- Amount required: approx. 20 m2
Description
Full set to refresh or recolor of grouts, including a sponge appli- cation tube à 125 ml and special sponge Ceresit Grout Reviver is a sealing colour which revives the colour of old and unaesthetic cement-based joint on glazed tiles. Due to the high covering power also other coloured grouts can be recoloured. Only apply on glazed tile surfaces. Not applicable for harsh materials as e.g. terra cotta, stoneware or natural stone. (Easy application, please shake/ knead Ceresit Grout Reviver well before applica- tion and apply top-dressed with sponge applicator of the tube on the clean and dry grout. When applied material appears matt, after app. 30 minutes, please prewet the surface with attached special sponge (with soft side) and afterwards rub off the excessing colour off the tiles with the rough side of the sponge in circular or diagonal motion (not in direction of grouting).
Documents to download
| In order to receive the Safety Data Sheet please contact your local Henkel partner. |
