2-component solvent-free, polystyrene-filled bitumen thick coating for rapid waterproofing of buildings
Properties
- Rain - resistant after approx. 1.5 hours
- Can be back-filled after 2 days
- Excellent workability
- Highly flexible and crack - bringing
- Amount required (depending on type of use):
- Ground moisture, non accumulating seepage water 3.3 l/m2
- Pressurized water 4.4 l/m2
Description
CP 48 is used for rapid waterproofing of structures against ground moisture as well as water pressing from outside up to 3 m immersion depth. It is also suitable for waterproofing tanks and for fixing insulation, drainage and protection boards. It can be applied on all mineral substrates and on existing bituminous substrates. CP 48 is resistant to all aggressive substances naturally present in the ground.
Tested at the German Institute of Construction Engineering
