Flexible, 2-component, waterproofing slurry. For crack-bridging waterproofing of buildings and structural components

Properties

• Crack-bridging up to 1 mm
• Flexible
• Frost-resistant
• Protects reinforced concrete
• Amount required (depending on type of use):
  • Ground moisture 3.0 kg/m2
  • Pressurized water 4.0 kg/m2

Description

CR 166 is designed for waterproofing and damp-proofing of mineral substrates. It can be used for exterior as well as interior waterproofing on deformable and non-deformable substrates. It can be applied on terraces, balconies, in wet rooms, underground constructions, sewage treatment plants, cesspits etc.
It can also be used for interior sealing of swimming pools and water tanks (including drinking water tanks) with a depth up to 50 m. CR 166 withstands negative water pressure and its flexibility allows to bridge cracks up to 1 mm width. The coating delays carbonization and can be used as an anti-corrosive layer protecting concrete and reinforced concrete from the atmospheric pollutants.

Tested at the Polish Institute of Construction Engineering