Invisible impregnation agent for absorbent, mineral substrates
Properties
- Resistant to driving rain
- Dirt-repellant
- Diffusion-open
- Does not form a film
- Amount required (depending on type of use):
- 0.5 l/m2 (on average)
- On slightly absorbent substrates approx. 0.3 l/m2
- On highly absorbent substrates approx. 0.7 l/m2
Description
CT 12 is used for reliable, water-repellent impregnation of clinker and faced clay bricks, faced facades, natural stone masonry and masonry pieces, exterior plasters, facing plasters, roof tiles, etc. even with existing hairline cracks (surface cracks) of up to 0.2 mm width. Suitable for preventing efflorescence, frost damage and the formation of mildew and moss.
