Key Facts

CT 75 SILICONE SELF CLEAN Silicone plaster, woodworm structure, grain 2.0 mm

Decorative thin-layer plaster for indoor and outdoor applications

Properties

  • highly self-cleaning effect
  • highly resistant to dirt
  • hydrophobic
  • very low water absorption and high vapour permeability
  • high durability
  • high elasticity and impact resistance
  • highly resistant to weather conditions
  • high stability of colour
  • BioProtect formula – resistant to fungi, algae and mould
  • possibility of machine application
  • available in full palette of Ceresit Colours of Nature®

Description

Ceresit CT 75 is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc. We recommend the application of the plaster CT 75 as façade plaster within Ceresit ETICS (External Thermal Insulation Composite Systems) with the application of EPS-boards (Expanded Polystyrene boards) and mineral wool. CT 75 plaster is recommended to be applied to the partitions where high permeability is required. CT 75 is available in a wide range of colours, but in case of intense dark colours, the material application on the façades should be limited to small areas, e.g. architectural details. Plaster CT 75 is protected form biological paralyses, e.g. fungus, mould and algae.

Step By Step

 

The whole content of the container should be carefully stirred. If the need appears, it is possible to adjust the product consistency to the application conditions by adding a small amount of clean water and mixing again. Neither rusty containers nor tools can be used. CT 75 should be evenly applied to the substrate at the thickness of the grain by means of a steel long fl oat held at the angle. Then, it should be given homogenous structure with a plastic long fl oat fl atly held. Depending on the type of the float movement: circular, horizontal or vertical it is possible to obtain the structure features resulting from the grain in plaster.

Do not sprinkle plaster with water!

Work should be done on one surface without breaks, keeping the same product consistency. If there is a need to stop working, the self-adhesive tape should be applied along the previously fixed line. Then plaster should be applied, structure formed, and tape torn off with the plaster remaining on it. After a break, the application should be continued from the fi xed place. The edge of the previously applied plaster can be protected with self-adhesive tape.

Products