CN 175 Multi-Purpose Self-Levelling Compound

Key Facts

CN 175 Plus Multi-Purpose Calcium Sulfate Levelling Compound

For layers of 3 - 60 mm in one single application

Properties

  • Virtuality tension free
  • Smooth surface
  • Ready for foot traffic in 6-8 hours (depending on layer's thickness)
  • Low dust formation during tempering
  • Comfortable and easy in application
  • Suitable for weak basis
  • Suitable for joint-free heated floors
  • Suitable for dry indoor premises
  • Environmentally safe

Description

Ceresit CN 175 self levelling compound is to be used for levelling horizontal concrete, cement-sand and other mineral bases, including heated ones, and also sand asphalt bases. The compound ist applied as basis for floor coverings in dry indoor premises, and can be used for repair of basis. Thickness of Ceresit CN 175 self-levelling compound layer is not to be exceeded 3-60 mm per one time. Ceresit CN 175 is not to be used for industrial floors and should be used for indoor areas only.  

Step By Step

The substrates must be clean, crack-free, sound, dry, free of substances that may impair adhesion and must comply with the current relevant local standards.

Mix CN 175 with clean, clear water (amount: see Technical Data). Stir with an electric drill and agitator attachment at approx. 600 rpm until the mixture is completely free of lumps.

Pour the levelling compound on the floor and spread it with a broom, smoothing trowel or squeegee;

Afterwards use a spiked roller to release any entrapped air. If mixed in batches, apply the batches immediately wet-in-wet.