CN 76 Pressure and Water Resistant Floor Levelling Compound

Key Facts

CN 76 Pressure & Water Resistant Floor Levelling Compound

Easily spreadable floor levelling compound for layers of 4 to 50 mm both indoors and outdoors

Properties

  • For indoor and outdoor use
  • Highly load-resistant
  • Rapid hardening
  • Suitable for machine application

Description

CN 76 is used for levelling substrates before installing tiles or other floor coverings and wood flooring (parquet). As a wearing surface in storerooms, cellars and attics. As a wearing surface in factory halls. As a wearing s urface in garages. For indoor and outdoor use.   

CN 76 is used for smoothing and levelling:

  • cement screeds and calcium sulphate screeds
  • ceramic, natural stone and terrazzo tiles
  • substrates with epoxy coatings
  • heated screeds

Step By Step

The substrates must be clean, crack-free, sound, dry, free of substances that may impair adhesion and must comply with the current relevant local standards.

Mix CN 76 with clean, clear water (amount: see Technical Data). Stir with an electric drill and agitator attachment at approx. 600 rpm until the mixture is completely free of lumps.

Pour the levelling compound on the floor and spread it with a broom, smoothing trowel or squeegee;

Afterwards use a spiked roller to release any entrapped air. If mixed in batches, apply the batches immediately wet-in-wet.