Features and Benefits

Grout mortar for earthenware & stoneware tiles, glass bricks & split tiles of joint width 2 to 20 mm


  • High final strength
  • Easy to apply & rewash
  • Weather- and frost resistant
  • For walls and floors
  • For indoor, outdoor use, balconies and patios
  • For ceramic tiles and slabs, clinker, split tiles and glass bricks

Read More

Dust-reduced joint filler for grouting tiles and slabs on walls and floors. The high filling power and easy washability of CE 35 ensures rapid and efficient grouting work.

Step by step

Preparation & mixing

Adhesive mortar must have set and dried sufficiently and the joints must be free of adhesive residues and dirt. Pour the required amount of CE 35 into a bucket with clean, clear water - use the correct mixing ratio with water as defined on the packaging. Mix with an electric driller until you achieve a homogenous mixture, free of lumps. Leave for 3 minutes to mature, then stir again.


Apply the mortar with a grouting tool on wall or floor in such a way that the joint is completely filled.


After the grout has started to set (fingertest), clean the area by wiping with a wet sponge and little water. The second cleaning should be done in diagonal movements with clean water.