CERESIT P 685

Features and Benefits

Elastic wood flooring adhesive for multi-purpose use. Powerful high-end alternative to conventional PUR or solvent-based adhesives

Properties

  • Suitable for many types of wood flooring
  • Long-lasting, strong bond
  • No priming required for most substrates
  • With Flextec® technology: Water- and solvent-free, Excellent workability, Easier removal of stains, Highly elastic

Read More

When installing wood flooring, this high-quality allrounder is applied directly on the previously prepared screed surface – no need for priming. Especially on large surface areas, its ease of spreading scores extra points. And the comfortable, long open time of about 30 minutes takes the stress out of your installation work.

Step by step

Step 1

The substrates must be clean, free from structural defects, firm, dry and free of substances which may impair adhesion

Step 2

Stir the adhesive well and apply it evenly to the substrate with a suitable notched trowel. Only apply as much adhesive as can be laid with wood flooring within the working time. Ensure the backing of the wood flooring is well wetted. Avoid gluing the edges.

Step 3

Allow a minimum gap of 10 mm from walls. Remove the spacer wedges from the perimeter joints immediately after installation. Avoid walking on the parquet surface both during and for at least 24 hours after installation.