CERESIT DA

  • For indoor use
  • Good strength values
  • Easy application

Features and benefits

Levelling compound for layers of 0.5 to 10 mm in one single application, suitable for dry indoor areas.

Properties

Description

CERESIT® DA is a very low-emission floor levelling compound for producing norm-conforming substrates that are ready to receive floor covering. CERESIT DA can be used on suitable: mineral screeds, tiles and slabs, concrete and natural stones and terrazzo. Only use in dry indoor areas. Do not use CERESIT DA as a screed or wearing surface. Do not use on mastic asphalt screeds. CERESIT DA meets the highest requirements for indoor air quality and environmental compatibility.Available pack size: 25 kg

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

SUBSTRATE PREPARATION FOR APPLICATION OF CERESIT DA

Fill the pre-defined amount of clean water into a clean mixing vessel and then add CERESIT DA.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

MIXING OF CERESIT DA

Mix with a suitable stirrer for approx. 2 minutes until the mixture is free of lumps. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

APPLICATION OF CERESIT DA

Apply the levelling compound in the required layer thickness using a screed rake or smoothing trowel. CERESIT DA can be applied by machine. 

Related how to guides

  • How to prepare floor for self levelling compound application
  • How, when and why use primers in flooring jobs

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/flooring/central-pdp#/ceresit-r-777/SAP_0201TNC015M2/searchResult.productFields.MainImageAltText}
    CERESIT R 777
    Dispersion primer for absorbent screeds and concrete floors, suitable for directly bonding floor coverings. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/flooring/central-pdp#/ceresit-r-740/SAP_0201TNC015L9/searchResult.productFields.MainImageAltText}
    CERESIT R 740
    One-component PUR fast barrier primer for absorbent and impervious substrates, suitable for highly absorbent substrates. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/flooring/central-pdp#/ceresit-cn-94/SAP_0201TNC014A4/searchResult.productFields.MainImageAltText}
    CERESIT CN 94
    Special primer for reliable bonding of floor levelling compounds, ceramic and natural stones on critical surfaces. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/central-pdp#/ceresit-cm-17/SAP_0201SBC013W2/searchResult.productFields.MainImageAltText}
    CERESIT CM 17
    Premium, flexible tile adhesive with high adhesive strength for all kind of tiles on difficult substrates and for large tiles. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/central-pdp#/ceresit-cl-51/SAP_0201SKC013R0/searchResult.productFields.MainImageAltText}
    CERESIT CL 51
    Flexible one-component sealing film for application under tiles and slabs, suitable for domestic wet areas indoors. 

Frequently asked questions

Only use CERESIT DA in dry indoor areas.

CERESIT DA can be used on suitable: mineral screeds, tiles and slabs, concrete and natural stones and terrazzo.

Only carry out floor installation work if the floor temperature is above 23 °C and relative humidity below 50 %.