Flooring primers
CERESIT R 766
MULTI-PURPOSE PRIMER
For absorbent and non-absorbent substrates, ensuring the adhesion of self-levelling compounds or repair mortars to the substrate.
-
High concentration - high coverage
-
For use in pre-existing and new substrates
-
Fast drying
- Description
- How to Use
- FAQ
CERESIT® R 766 is a high-concentrated adhesive promoter with a very low emission of volatile organic compounds (VOCs). It is mainly used for porous, non-porous and glazed surfaces such as ceramic tile or epoxy coatings, etc. and porous surfaces such as concrete, plaster, terrazzo, mortar, stone, wood, etc. ensuring the adhesion of self-levelling compounds or repair mortars to the substrate.Available canister size: 10 kg
-
High concentration - high coverage
-
For use in pre-existing and new substrates
-
Fast drying
-
Suitable underneath wood flooring
Substrates must comply the requirements of comparable national standards. In particular they must be clean, free from structural defects, firm, permanently dry and free of release agents. In case of cement based substrates, any laitance must be removed using suitable machines.
Shake vigorously before use and then dilute CERESIT R 766 with water 1:1 for non-absorbent surfaces and 1:4 (1 CERESIT R 766 : 4 water) for porous surfaces.
Pour the dilution on the floor and distribute it evenly using a plush roller and brush moving them crosswise. For highly absorbent substrates apply a second coat. Let dry 1 to 2 hours.
It is mainly used for porous, non-porous and glazed surfaces such as ceramic tile or epoxy coatings, etc. and porous surfaces such as concrete, plaster, terrazzo, mortar, stone, wood, etc. ensuring the adhesion of self-levelling compounds or repair mortars to the substrate.
CERESIT R 766 is a multi-purpose flooring primer, which can be used as a primer before directly bonding floor coverings and wood flooring on suitable substrates with CERESIT dispersion adhesives.
Only carry out floor installation work if the floor temperature is above 15 °C, air temperature above 18 °C and relative humidity below 75 %.