CERESIT® IN 10 is used for priming strong but absorbent substrates before laying the skimming compound, decorative patching compound or painting. It prevents too fast drying of materials applied later. IN 10 penetrates the substrate and binds the aggregate grains, but without increasing the strength parameters in the substrate cross-section. It ensures uniform drying of the whole surface, leading to a uniform absorption capacity of the substrate.Available canister size: 5 l and 10 l
Shake the contents of the package several times.
Apply the formulation onto the substrate with a paint roller or brush.CERESIT IN 10 dries within approximately 2 hours.
If after drying of the formulation the substrate is still absorbent, priming must be repeated. Tools and fresh stains should be washed with water.
It is recommended in particular for gypsum, aerated concrete substrates, and substrates such as concrete, traditional cement and cement-lime plasters, cellular concrete. It is also good for priming non-impregnated plasterboards.
Ideal for finishing skim coats, paint coats and decorative coating. Suitable for indoors and outdoors.
Works should be carried out with ambient and substrate temperature from +5 °C to +25 °C and air humidity below 80%.