- Comfortable setting time (20 min)
- High strength after curing
- For reconstruction of concrete elements
-
Comfortable setting time (20 min)
-
High strength after curing
-
For reconstruction of concrete elements
-
For filling cavities and cracks up to 50 mm
-
Water and frost resistant
-
Chloride free – does not cause corrosion of metal elements
CERESIT® CX 20 COMFORT is a mortar for precise assembly of elements and filling up cavities, characterized by a comfortable setting time (20 min), which makes it suitable for a wide range of users. Ceresit CX 20 COMFORT has a perfect consistency both for horizontal and vertical surfaces and is water and frost resistant, so it is a safe solution for indoor and outdoor applications. Ceresit CX 20 COMFORT helps to handle any task without effort and rush.
Ceresit CX 20 COMFORT mortar can be applied on compact, load-bearing and clean substrates free of substances that reduce adhesion, such as: fats, bitumen, dust. The substrate should be forged or drilled with a mounting hole of min. 5 mm larger than the embedded element. In case of larger cavities, the gap should be disassembled in the so-called swallow tail.
Pour the specific amount of CX 20 COMFORT into the water. Stir until homogenous without lumps (2-3 minutes). Apply CX 20 COMFORT in the cavities. Reprofile a proper shape. The mortar will set within 20 minutes.
No sooner than after 12 hours, next layers can be proceed on the Ceresit CX 20 COMFORT, e.g. fixing ceramic tiles. Ceresit CX 20 COMFORT mortar contains cement and mixed with water has an alkaline reaction.
CERESIT CX 20 can be applies for installation of electric sockets, water pipe fixings, sanitaty utensils and furniture, filling cavities, cracks and reconstruction of cracks.
CERESIT CX 20 can be used for assembly of elements made of metal, plastics, substrates such as concrete, walls, filling cavities and cracks of the size from 5 to 50 mm in walls and plasters (e.g. filling installation grooves).
Work should be carried out at ambient and substrate temperatures between + 5°C and +30°C. At extreme temperatures, suitable pre-heated or chilled tap water can be used. No sooner than after 12 hours, next layers can be proceed on the Ceresit CX 20 COMFORT, e.g. fixing ceramic tiles.