Universal primers
CERESIT CT 99
CONCENTRATE FUNGICIDE
Renovation concentrate for removing fungi, lichens, moss and bacterial contamination, suitable for indoor and outdoor areas.
-
Free of heavy-metals
-
Stainless application
-
Over-paintable
- Description
- How to Use
- FAQ
CERESIT® CT 99 is suitable for removing fungi, lichens, moss and for destroying micro- organism, bacteria, etc. For indoor and outdoor use. Suitable for use on surfaces before paint or coat application.Available canister size: 1 l and 10 l.
-
Free of heavy-metals
-
Stainless application
-
Over-paintable
-
Permits capillary action
CERESIT CT 99 can be used on all dry, largely clean substrates (paint coats, plasters, concrete etc.). Clean away heavy dirt and remove surface growth with a wire brush.
Before use, dilute CERESIT CT 99 with water at a ratio of 1 : 2 to 1 : 5.
Brush this solution generously onto the affected areas -do not apply by spraying! Always apply CERESIT CT 99 before the first priming coat and allow the solution to act for 8 to 10 hours.
The product is suitable for use on such substrates as paint coats, plaster, concrete, etc. CERESIT CT 99 formulation leaves no stains and does not contain heavy metals.
CERESIT CT 99 is a formulation used for removing fungi and algae. It destroys them effectively without causing any danger to people and the environment. Suitable for indoor and outdoor use.
In case of contact with skin, rinse with running water and soap. In case of contact with the eyes, immediately rinse the eye with plenty of water and consult an ophthalmologist. In case of swallowin, rinse the mouth and drink plenty of drinking water, consult a physician.