Special mortars

CERESIT CX 20
COMFORT

Assembly and repair mortar. Mortar for precise assembly of elements and filling up cavities, characterized by a comfortable setting time.

Comfortable setting time (20 min)
High strength after curing
For reconstruction of concrete elements

TDS (1)

CERESIT CX 20

en_GL | application/pdf

Find a retailer

We have you covered

Find a retailer

Works Well With

$${/content/heliux/adhesive/ceresit/com/en/products/mortars-and-auxiliaries/product#/ceresit-cx-5/SAP_0201VBC014O4/searchResult.productFields.MainImageAltText}$

Special mortars

CERESIT CX 5

Universal fast-setting mortar for quick, easy and strong fixing and assembling with perfect consistency for horizontal and vertical substrates (indoor & outdoor applications).

...
$${/content/heliux/adhesive/ceresit/com/en/products/mortars-and-auxiliaries/product#/ceresit-cx-15/SAP_0201VBC014O2/searchResult.productFields.MainImageAltText}$

Special mortars

CERESIT CX 15

Mortar for high-strength grouting, anchoring and assembly.

...
$${/content/heliux/adhesive/ceresit/com/en/products/mortars-and-auxiliaries/product#/ceresit-cx-10/SAP_0201VFC014O1/searchResult.productFields.MainImageAltText}$

Building foams

CERESIT CX 10

Ready-to-use, quick-drying PU adhesive with good adhesion to the typical construction substrates.

...
$${/content/heliux/adhesive/ceresit/com/en/products/waterproofing/product#/ceresit-cr-65/SAP_0201WHC014C3/searchResult.productFields.MainImageAltText}$

Cement slurries rigid

CERESIT CR 65

1-component cementitious waterproofing slurry, perfect to improve concrete substrate resistance on cementitious substrates that are ready for coating and non-shrinking, non-deformable, and salt-free.

...

Description
How to Use
FAQ

Product Description

CERESIT® CX 20 COMFORT is a mortar for precise assembly of elements and filling up cavities, characterized by a comfortable setting time (20 min), which makes it suitable for a wide range of users. Ceresit CX 20 COMFORT has a perfect consistency both for horizontal and vertical surfaces and is water and frost resistant, so it is a safe solution for indoor and outdoor applications. Ceresit CX 20 COMFORT helps to handle any task without effort and rush.

Comfortable setting time (20 min)
High strength after curing
For reconstruction of concrete elements
For filling cavities and cracks up to 50 mm
Water and frost resistant
Chloride free – does not cause corrosion of metal elements

packshot-front-pl-ceresit-CX20-1280x1280

How to Use

SUBSTRATE PREPARATION FOR APPLICATION OF CERESIT CX 20

Ceresit CX 20 COMFORT mortar can be applied on compact, load-bearing and clean substrates free of substances that reduce adhesion, such as: fats, bitumen, dust. The substrate should be forged or drilled with a mounting hole of min. 5 mm larger than the embedded element. In case of larger cavities, the gap should be disassembled in the so-called swallow tail.

APPLICATION OF CERESIT CX 20

Pour the specific amount of CX 20 COMFORT into the water. Stir until homogenous without lumps (2-3 minutes). Apply CX 20 COMFORT in the cavities. Reprofile a proper shape. The mortar will set within 20 minutes.

IMPORTANT TO NOTE WHEN USING CERESIT CX 20

No sooner than after 12 hours, next layers can be proceed on the Ceresit CX 20 COMFORT, e.g. fixing ceramic tiles. Ceresit CX 20 COMFORT mortar contains cement and mixed with water has an alkaline reaction.

Frequently asked questions

CERESIT CX 20 can be applies for installation of electric sockets, water pipe fixings, sanitaty utensils and furniture, filling cavities, cracks and reconstruction of cracks.

Related How-To Guides

View all

Chemical anchor in hollow masonry

Fix metal anchor in hollow masonry substrate.
Chemical anchor in concrete

Fixing metal anchor in in concrete.

CERESIT CX 20 COMFORT

Documents