Ceretherm Self Clean Wool

Insulates and keeps facade dry and clean

Advanced insulation system supported by Double Dry and Fibre Force technologies. It insulates and keeps the facade dry and clean for longer. Facade is self cleaning, vapour permeable and highly resistant to water uptake and dirt pick up. All these properties make this system highly reliable, long lasting and most recommended.



  • Self cleaning
  • Dirt and water uptake resistant
  • Vapour permeable & hydrophobic
  • Resistant to aggressive dirts
  • Highly resistant to biological contamination like fungi and algae
  • Highly flexible & durable
  • Resistant to thermal stresses and cracks
  • Excellent application parameters
  • Certification: ETA Ceresit Ceretherm Wool Classic

Recommended for:

buildings where more advanced insulation system can better resist to water, dirt pick up and make facade dry and clean for longer.


1. Fixing*

Ceresit CT 180 MW Strong Fix Adhesive Mortar for Mineral Wool or Ceresit CT 190 MW Flex Adhesive and Reinforcing Mortar for Mineral Wool, anchors with a steel core classified as ETAG 014, number of fasteners and their arrangement should be determined by an architect, based on the substrate analysis and load calculations

2. Insulation material*

Mineral wool boards or lamella classified as EN 13162, with thickness up to 36 cm

3. Reinforced layer*

Ceresit CT 190 MW Flex Adhesive and Reinforcing Mortar for Mineral Wool and Ceresit CT 325 glass fibre mesh

4. Priming paint

Ceresit CT 16 Priming paint

5. Plaster

Ceresit CT 74, CT 75 Silicone Self Clean, silicone plasters

6. Paint

Ceresit CT 48 Silicone Self Clean, silicone paint
Ceresit CT 49 Nanosilicone Reno, nanosilicone paint


* Optionally you can use as an adhesive and rendering mortars Thermouniversal or CT80 covered by ETA Ceresit Ceretherm Universal MW