Primers (finishes)
CERESIT CT 16
QUARZ CONTACT
Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters.
-
Improves the adhesion between ETICS system layers
-
Low absorbency and vapour permeability
-
Easier application of plasters
- Description
- How to Use
- FAQ
CERESIT® CT 16 facilitates the application of thin-layer plasters and renderings inside and outside the buildings. It is recommended for priming the reinforced layers within CERESIT Ceretherm ETICS and traditional plasters. CT 16 can be applied to the surfaces of chipboards, gypsum cardboards, gypsum plasters, all types of concrete and strong paint coats. Available pack size: 10 l
-
Improves the adhesion between ETICS system layers
-
Low absorbency and vapour permeability
-
Easier application of plasters
-
Perfect final effect of the finishing layer
-
Ready to use, can be applied with roller or brush
-
High opacity
The substrates to be coated with the paint CERESIT CT 16 should be smooth, even, dry and free from any substances that decrease adhesion: grease, bitumen, dust, etc. The absorptive substrates, e.g. gypsum plasters, chipboards, non-impregnated gypsum cardboards should be primed with the agent CERESIT CT 17 and then left for drying for approx. 2 hours.
The content of the packing should be stirred. Neither rusty containers nor tools should be used. Do not dilute the paint! There is recommended to apply one even layer CERESIT CT 16 using roller or brush. Drying time is approx. 3 hours. Tools and fresh stains should be washed with water.
The priming paint should be applied in the ambient temperature and that of the substrate from +5 °C to +25 °C and the humidity below 80 %. In case of contact with eyes, they should be rinsed with water and a general practitioner should be consulted.
CERESIT CT 16 facilitates the application of thin-layer plasters and renderings inside and outside the buildings. It is recommended for priming the reinforced layers within CERESIT Ceretherm ETICS and traditional plasters.
CERESIT CT 16 facilitates the application of thin-layer plasters and renderings inside and outside the buildings. It is recommended for priming the reinforced layers within CERESIT Ceretherm ETICS and traditional plasters.
CERESIT CT 16 facilitates the application of thin-layer plasters and renderings inside and outside the buildings. It is recommended for priming the reinforced layers within CERESIT Ceretherm ETICS and traditional plasters.
Our Eco Buckets are made of polypropylene and can be recycled.
We incorporate post-consumer recycled plastic (PCR) into our Eco Buckets, reducing carbon emissions.
Ceresit's commitment to sustainability extends beyond Tiling products. Now, our Facade Solutions also benefit from Eco Bucket with packaging made from up to 62% recycled plastic.