Wet plasters (finishes)
CERESIT CT 74
SILICONE SELF-CLEAN
Decorative thin-layer plaster for indoor and outdoor applications, stone structure, grain 1.5, 2.0 or 2.5 mm
-
Highly self-cleaning, resistant to dirt and hydrophobic
-
Low water absorption and high vapour permeability
-
High durability, elasticity and impact resistance
- Description
- How to Use
- FAQ
CERESIT® CT 74 is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards. We recommend the application of CT 74 as facade plaster within CERESIT ETICS with the use of EPS-boards and MW. CT 74 plaster is recommended to be applied to the partitions where high permeability is required and it is protected form biological paralyses. Available pack size: 25 kg.
-
Highly self-cleaning, resistant to dirt and hydrophobic
-
Low water absorption and high vapour permeability
-
High durability, elasticity and impact resistance
-
Resistant to weather conditions and stability of colour
-
BioProtect formula: resistant to fungi, algae, mould
-
Possibility of machine application
CERESIT CT 74 can be applied to smooth, carrying, dry and clean substrates free from grease, bitumen, dust and other substances decreasing adhesion. Uneven and damaged substrates should be first smoothed and repaired. The existing dirt, layers of low strength, as well as elastic, lime and adhesive paint coatings should be removed. CT 74 can be applied when the priming paint CT 16 becomes completely dry.
CERESIT CT 74 should be evenly applied on the substrate at the thickness of the grain by means of a steel long float held at the angle. Then, it should be given a homogeneous structure with round movements by means of a plastic long float flatly held to achieve the appearance densely laid out aggregate grains structure. Work should be done on one surface without breaks, keeping the same product consistency.
Application should be performed in the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. This product should not be mixed with other plasters, pigments, resins and binders. The rooms where the material has been applied should be aired before they are used. In case of contact with eyes, they should be rinsed with water.
CERESIT CT 74 is used for making thin-layer plasters. We recommend the application of CT 74 as facade plaster within CERESIT ETICS with the use of EPS-boards and mineral wool. CT 74 plaster is recommended to be applied to external walls where high permeability is required together with very low water absorption and high dirt resistance.
CERESIT CT 74 can be applied on external insulation systems, concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc
CERESIT CT 74 is present in CERESIT Ceretherm SELF CLEAN System
Our Eco Buckets are made of polypropylene and can be recycled.
We incorporate post-consumer recycled plastic (PCR) into our Eco Buckets, reducing carbon emissions.
Ceresit's commitment to sustainability extends beyond Tiling products. Now, our Facade Solutions also benefit from Eco Bucket with packaging made from up to 62% recycled plastic.