Skip to Content

CERESIT CT 60 VISAGE

  • Recommended for stencils
  • Low-absorbent and high-elasticity
  • Resistant to damage and weather conditions

Features and benefits

Decorative brick and stone effect plaster, recommended for clinker brick or natural stone stencils for indoor and outdoor use.

Properties

Description

CERESIT® CT 60 is used for making building facades with the use of stencils which imitate clinker bricks or natural stones. As facade plaster, it is one of the components used within CERESIT Ceretherm ETICS with application of expanded polystyrene boards and mineral wool. It can be used on concrete surfaces, traditional cement plasters, gypsum surfaces, chipboards, drywall boards. In case of dark colours, application over additional heating systems should be limited to small areas. Available pack size: 25 kg

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

CERESIT CT 60 VISAGE SUBSTRATE PREPARATION

CERESIT CT 60 should be used on smooth, carrying, dry surfaces, free of grease, bitumen, dust and other substances which decrease adhesion. Uneven and damaged surfaces should be first smoothed and repaired. The existing soiling, low-strength layers and paint coats of elastic, lime and adhesive paints need to be completely removed. CT 60 may be applied after complete drying of CT 16 priming paint.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CT 60 VISAGE

Stir thoroughtly the content of the container. Before application of the plaster, fix stencils on the surfaces. Apply CERESIT CT 60 0.5 uniformly on the surface. Texture is obtained right after application of the plaster by way of smoothing it with a steel long float or texturing. The stencils shall be removed after initial setting of the plaster gently puling the stencil down partially. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

IMPORTANT TO NOTE WHEN USING CERESIT CT 60 VISAGE

Application should be performed in dry conditions, at air and surface temperature from +5 °C to +25 °C and with relative air humidity below 80 %. Do not mix the product with other plasters, dyes, resins and other binding materials. Ventilate the rooms after application of plaster until odour is no longer perceived. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-710-visage/SAP_0201IDC014K7/searchResult.productFields.MainImageAltText}
    CERESIT CT 710 VISAGE
    With sandstone or granite structure for indoor and outdoor use. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}
    CERESIT CT 17
    Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-720-visage/SAP_0201IEC014L0/searchResult.productFields.MainImageAltText}
    CERESIT CT 720 VISAGE
    Stylized plaster for modelling wooden structures for outdoor and indoor use. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-16/SAP_0201IGC014E8/searchResult.productFields.MainImageAltText}
    CERESIT CT 16
    Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-760-visage/SAP_0201IDC014L7/searchResult.productFields.MainImageAltText}
    CERESIT CT 760 VISAGE
    With the texture of architectural concrete for decorative facade coatings in ETICS for outdoor and indoor use. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-zs/SAP_0201IBC016A0/searchResult.productFields.MainImageAltText}
    CERESIT ZS
    For fixing expanded polystyrene boards in the insulation of buildings in ETICS systems using the light-wet method. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-zu/SAP_0201IAC016A1/searchResult.productFields.MainImageAltText}
    CERESIT ZU
    For polystyrene foam and making a reinforced layer; for fixing polystyrene boards and for making a thin layer reinforced with mesh on them when insulating buildings using the light-wet method. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-74/SAP_0201IDC014L4/searchResult.productFields.MainImageAltText}
    CERESIT CT 74
    Decorative thin-layer plaster for indoor and outdoor applications, stone structure, grain 1.5, 2.0 or 2.5 mm 

Frequently asked questions