Skip to Content

CERESIT CT 87 WHITE FLEXIBLE

  • 2-in-1: does not require priming before plaster’s application
  • Strengthened with unique combination of fibres
  • High-adhesion to mineral substrates, EPS and mineral wool

Features and benefits

For fixing Expanded Polystyrene (EPS) boards, Mineral Wool boards and for applying a thin armoured layer for thermal insulation of buildings in ETICS systems.

Properties

Description

CERESIT® CT 87 is designed to warm up external walls of the buildings by application of external thermal insulation composite system using EPS- or mineral wool façade boards. CT 87 is used for fixing of facade boards and for applying the reinforcing protection layer to insulate the newly constructed objects as well as older buildings to be thermo-renovated. CT 87 is resistant to the formation of cracks, is flexible, light, has a homogenous consistency and it is easier to be stirred, applied and spread. Available pack size: 25 kg

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

CERESIT CT 87 SUBSTRATE PREPARATION

Fixing thermal insulation boards: CERESIT CT 87 shows good adhesion to carrying, compact and dry substrates. The adhesion to the existing plasters and paint coatings should be checked before the application. Armoured layer application: when CT 87 is set, any unevenness of the boards should be ground with abrasive paper, then any loose particles of insulation materials should be brushed whereas the boards should be additionally reinforced.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CT 87

CERESIT CT 87 should be poured into cool clean water and stirred until the homogeneous mass is obtained. Fixing thermal insulation boards: the mortar should be applied along the board edge and immediately, the board should be pressed to the wall. Reinforced layer application: the mortar should be spread along the surface of the boards. The glass fibre mesh should be applied on the fresh mortar, it should be immersed and filled smoothly. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

IMPORTANT TO NOTE WHEN USING CERESIT CT 87

The armoured layer should not be applied on highly insolated surfaces and the applied layer should be protected against rain. Application should be performed in dry conditions with the substrate and ambient temperature from +5 °C to +25 °C. Skin and eyes should be protected. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-84-express-plus/SAP_0201ICC014M8/searchResult.productFields.MainImageAltText}
    CERESIT CT 84 EXPRESS PLUS
    For EPS and MW boards, for thermal insulation of buildings in ETICS systems. Especially recommended for work in low-temperature when cement adhesives drying time is significantly longer. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17-transparent/SAP_0201JAC016G7/searchResult.productFields.MainImageAltText}
    CERESIT CT 17 TRANSPARENT
    Deep penetrating, quick-drying primer for surface reinforcement of all absorbent substrates, suitable for indoor and outdoor areas. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}
    CERESIT CT 17
    Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-174/SAP_0201IDC014F2/searchResult.productFields.MainImageAltText}
    CERESIT CT 174
    Decorative thin layer plaster for indoor and outdoor applications, stone like structure, grain 1.5 mm or 2 mm. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-74/SAP_0201IDC014L4/searchResult.productFields.MainImageAltText}
    CERESIT CT 74
    Decorative thin-layer plaster for indoor and outdoor applications, stone structure, grain 1.5, 2.0 or 2.5 mm 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-175/SAP_0201IDC014F4/searchResult.productFields.MainImageAltText}
    CERESIT CT 175
    Decorative thin-layer plaster for indoor and outdoor applications, woodworm like structure, grain 2 mm. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-76/SAP_0201IDC014L6/searchResult.productFields.MainImageAltText}
    CERESIT CT 76
    Decorative thin-layer plaster with increased UV protection for indoor and outdoor applications. Stone like structure with grane size of 1.5 mm or 2 mm. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-325/SAP_0201IJC014H2/searchResult.productFields.MainImageAltText}
    CERESIT CT 325
    Reinforcing mesh for Ceresit Ceretherm External Thermal Insulation Composite Systems. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-75/SAP_0201IDC014L5/searchResult.productFields.MainImageAltText}
    CERESIT CT 75
    Decorative thin-layer plaster for indoor and outdoor applications, woodworm structure, grain 2 mm. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-79/SAP_0201IDC014M0/searchResult.productFields.MainImageAltText}
    CERESIT CT 79
    Highly-elastic decorative thin-layer plaster for outdoor and indoor applications. Elastomeric plaster, stone texture 1,5 mm grain. 

Frequently asked questions