Adhesive mortars
CERESIT ZS
For fixing expanded polystyrene boards in the insulation of buildings in ETICS systems using the light-wet method.
-
Good adhesion
-
Weather-resistant
-
Economical to use
- Description
- How to Use
- FAQ
CERESIT® ZS adhesive mortar is used for gluing EPS and XPS polystyrene boards in complex external wall insulation systems (ETICS) of buildings using the CERESIT Ceretherm light-wet method. It is suitable for both newly erected and thermo-renovated buildings. Mortar-glued boards require additional fastening with mechanical fasteners. CERESIT ZU, CT 85 or CT 100 mortar should be used to make a layer reinforced with fiberglass mesh on polystyrene boards. Available pack size: 25 kg
-
Good adhesion
-
Weather-resistant
-
Economical to use
-
Can be used for graphite polystyrene
-
Possibility of machine application
CERESIT ZS shows good adhesion to carrying, compact, dry and clean substrates free from substances decreasing adhesion of surfaces of walls, plasters and concretes. The adhesion to the existing plasters and paint coatings should be checked before starting the application. Any losses and uneven surfaces should be filled or covered. Any surface contaminant and other adhesion impairing substances, steam-tight paint coatings and the coats with low adhesion to the substrate should be removed.
Put CERESIT ZS into water and stir until a homogeneous mass without lumps is obtained. Apply the ready mortar with a trowel around the perimeter of the slab in a 3-4 cm wide strip and in several patches with a diameter of approx. 8 cm. Immediately apply the slab to the wall and press down. When the CERESIT ZS mortar has set (after approx. 3 days), the boards should be sanded with sandpaper and start additional fastening with mechanical fasteners.
The work should be carried out in dry conditions, with an ambient temperature and substrate temperature ranging from +5°C to +25°C. The sandy mortar has irritating properties, and the cement and lime content and lime content gives the product an alkaline reaction when mixed with water. Skin and eyes should be protected. In case of contact with eyes, rinse abundantly with water and seek medical advice.
CERESIT ZS adhesive mortar is used to adhere EPS and XPS polystyrene boards in complex CERESIT Ceretherm light-wet external wall insulation systems (ETICS) for buildings. It is suitable for both newly erected and thermo-renovated buildings.
CERESIT ZS can be applied on masonry surfaces, plaster and concrete free from substances that reduce adhesion.
CERESIT ZS is present in CERESIT Ceretherm POPULAR System
CERESIT ZS IS PART OF OUR BIM MODELS
Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.
