CERESIT® CN 76 is for levelling, repairing and resurfacing wall areas as well as for levelling and filling floor areas made of concrete or cement screeds. For levelling out stair landings and steps.Available pack size: 25 kg
The substrates must be clean, crack-free, sound, dry, free of substances that may impair adhesion and must comply with the current relevant local standards.
Mix CERESIT CN 76 with clean, clear water (amount: see Technical Data). Stir with an electric drill and agitator attachment at approx. 600 rpm until the mixture is completely free of lumps.
Pour the levelling compound on the floor and spread it with a broom, smoothing trowel or squeegee. Afterwards use a spiked roller to release any entrapped air. If mixed in batches, apply the batches immediately "wet-in-wet".
CERESIT CN 76 is used for smoothing and levelling cement screeds and calcium sulphate screeds, ceramic, natural stone and terrazzo tiles, substrates with epoxy coatings, heated screeds.
For levelling, repairing and resurfacing wall areas as well as for levelling and filling floor areas made of concrete or cement screeds. For levelling out stair landings and steps.
Use CERESIT CN 76 only in dry conditions and at temperatures of +5 °C to +30 °C. The optimum working temperature is between +15 °C and +25 °C. Protect the freshly levelled surface from direct sunshine and draughts.