- NO LIMIT for size and type of tiles
- AERO technology: perfectly aerated, malleable texture
- MICRO GEL technology: application at high temperatures
-
NO LIMIT for size and type of tiles
-
AERO technology: perfectly aerated, malleable texture
-
MICRO GEL technology: application at high temperatures
-
LOW DUST – 75% less dust thanks to ecological cellulose fibres
-
Underfloor heating, bathrooms, balconies, terraces, pools
-
Absorbs surface stresses
CERESIT® CM 17 PRO is a technologically advanced tile fixing mortar, which allows gluing any size and type of tiles - without limits. For indoor and outdoor application. Excellent spreading and very high adhesion ensure the highest work safety. With dust-reduced formula.Available pack sizes: 5 kg, 22,5 kg, 25kg,.
CERESIT CM 17 PRO mortar can be used on load-bearing and dry substrates, free from substances that reduce adhesion (such as: fats, bitumen, dusts).
Pour the contents of the package into a precisely measured amount of clean, cool water and mix with a drill with a mixer until a homogeneous mass is obtained. Wait 5 minutes and mix again. If necessary, add a small amount of water and mix again
Spread the mortar over the substrate with a notched trowel. The size of the trowel teeth depends on the size of the tiles. Properly selected consistency and size of trowel teeth ensure that a pressed, typical ceramic tile does not flow from the vertical plane, and the mortar covers min. 65% of the PCB mounting surface.
Suitable for critical substrates (OSB, plasterboards, waterproofing, tile on tile).
Suitable for underfloor heating, bathrooms, balconies, terraces, and swimming pools.
Work should be carried out in dry conditions at temperature air and ground from +5°C to +30°C.