CERESIT® DA is a very low-emission floor levelling compound for producing norm-conforming substrates that are ready to receive floor covering. CERESIT DA can be used on suitable: mineral screeds, tiles and slabs, concrete and natural stones and terrazzo. Only use in dry indoor areas. Do not use CERESIT DA as a screed or wearing surface. Do not use on mastic asphalt screeds. CERESIT DA meets the highest requirements for indoor air quality and environmental compatibility.Available pack size: 25 kg
Fill the pre-defined amount of clean water into a clean mixing vessel and then add CERESIT DA.
Mix with a suitable stirrer for approx. 2 minutes until the mixture is free of lumps.
Apply the levelling compound in the required layer thickness using a screed rake or smoothing trowel. CERESIT DA can be applied by machine.
Only use CERESIT DA in dry indoor areas.
CERESIT DA can be used on suitable: mineral screeds, tiles and slabs, concrete and natural stones and terrazzo.
Only carry out floor installation work if the floor temperature is above 23 °C and relative humidity below 50 %.