-
Self-levelling
-
For both absorbent and non-absorbent surfaces
-
For indoor application
-
Suitable for heated floors and parquet
-
Particularly smooth final surface
-
High traffic resistance
CERESIT® DH Maxi is a self-levelling screed used for levelling interior floor surfaces of apartment and public buildings, suitable for covering with carpet, parquet, PVC, linoleum, up to a thickness of maximum 30 mm. It serves to level the surfaces of concrete, cement screed, etc. After the proper preliminary treatment it can be used for levelling the floors from the anhydrite screed, ceramics. After hardening, the result is a rigid, smooth surface. Available pack size: 25 kg
For the preparation of the levelling composition in 5.0-5.5 l of cold water gradually add 25 kg (1 bag) of powder.
Stir continuously with the electric mixer until a homogeneous composition is obtained, without egglomerations (3-5 minutes). After a resting period of 3-5 minutes, mix again.
The mixture must be used in 20-25 minutes by applying it continuously and evenly on the floor. The screed is poured and spread using a steel rake (trowel with although thin teeth) after which deaerate using the deaeration roller.
Areas that include carpets, parquet, PVC, linoleum or rubber can be put over the floor surfaces treated with CERESIT DH MAXI in a layer with up to maximum 30 mm thickness.
CERESIT DH MAXI self-levelling screed can be used to level the interior surfaces at the entrance of blocks, public buildings, before covering with carpet, parquet or other materials.
Do not install floor coverings at floor temperatures below 15°C or at a relative humidity above 75 %.