CERESIT® P 625 is designed to prevent hardwood floor from expanding and contracting in response to climatic changes over year. The water- and solvent-free, 2-component polyurethane adhesive does not allow any movement of the wood flooring – even when installing hardwood of unusually large dimensions.Available bucket size: 8+12 kg
Substrates must be clean, free from structural defects, firm, dry and free of substances which may impair adhesion. Thoroughly grind and vacuum off new substrates in order to free them from dust and adhesion-inhibiting layers.
The adhesive consists of two components (resin and hardener). Use a sharp tool to punch a few holes through the plastic plug and the bottom of the top container, which acts as the bucket lid. Carefully mix the resin and hardener using an electric drill and stirrer attachment, until the mixture is homogenous.
Apply the adhesive evenly with a notched trowel to the substrate. Only apply as much adhesive as can be laid with wood flooring within the working time. Ensure the back of the wood flooring is well- wetted. Avoid gluing the edges. Allow a minimum gap of 10 mm from walls. Remove the spacer wedges from the perimeter joints immediately after installation. Avoid walking on the wood flooring both during and for at least 24 hours after installation.
The adhesive is suitable for all types of wood flooring like light- and heavy-duty woodblock flooring, laminate floors, CERESIT underlays suitable for use with wood flooring, PVC design flooring Suitable for use on: screeds, dry screed constructions, chipboards (V100), OSB boards, all CERESIT levelling compounds suitable underneath wood, natural stones, tiles and terrazzo.
Suitable for all parquet and wood flooring types.
Only carry out floor installation work if the floor temperature is above 15 °C, air temperature above 18 °C and relative humidity below 75 %.