- High resistance in a short period of time
- High adhesion
- Very good quality matt white finishing
-
High resistance in a short period of time
-
High adhesion
-
Very good quality matt white finishing
-
Resistant to cracking in thick layer
-
Layer thickness up to 10 mm
CERESIT® CT 126 render and skim coat is designed to cover traditionally plastered surfaces and concrete surfaces. The finishing may be performed traditionally by polishing with abrasive paper or by smoothing with the iron trowel, shortly before the material applied on the wall hardens. CERESIT CT 126 allows levelling the surfaces by applications up to 10 mm in a single layer. The surface coated with CERESIT CT 126 shall become perfectly smooth and matt white.Available pack size: 5 kg and 20 kg
CERESIT CT 126 may be used on dry, dense, rough and clean surfaces, free of substances which could reduce adhesion (fats, bitumen, dust).
CERESIT CT 126 shall be introduced in the measured volume of clean, clear, cold water and shall be stirred by a paddle mixer until a uniform, lump free mass is obtained. The stirring shall be repeated after 3 - 5 minutes.
The CERESIT CT 126 Render and skim coat shall polishing plaster coat shall be applied in a uniform layer on the substrate, using the iron trowel. After drying the surface may be polished with abrasive paper. See more details for the application of the product in the Technical Data Sheet.
Plaster CERESIT CT 126 can be used for fixing gypsum boards, felt or decorative plaster elements. CT 126 coat has excellent adhesion to gypsum substrates, plasterboards, aerated concrete, cement and cement-lime plasters. It can also be applied on concrete substrates.
CERESIT CT 126 is plaster perfectly suitable for levelling and smoothing defects on wall and ceiling surfaces. The material can be used inside buildings in dry rooms, without permanent exposition to high humidity.
The works will be done in a dry environment, at an air and support temperature of +5 °C – +30 °C.