Skip to Content

CERESIT CT 126 SUPER START

  • High resistance in a short period of time
  • High adhesion
  • Very good quality matt white finishing

Features and benefits

Render and skim coat for levelling surfaces and filing irregularities between 2 and 10 mm and for obtaining smooth surfaces on indoor walls and ceilings.

Properties

Description

CERESIT® CT 126 render and skim coat is designed to cover traditionally plastered surfaces and concrete surfaces. The finishing may be performed traditionally by polishing with abrasive paper or by smoothing with the iron trowel, shortly before the material applied on the wall hardens. CERESIT CT 126 allows levelling the surfaces by applications up to 10 mm in a single layer. The surface coated with CERESIT CT 126 shall become perfectly smooth and matt white.Available pack size: 5 kg and 20 kg

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

SUBSTRATE PREPARATION FOR APPLICATION OF CERESIT CT 126

CERESIT CT 126 may be used on dry, dense, rough and clean surfaces, free of substances which could reduce adhesion (fats, bitumen, dust).

CERESIT Tiling CE60 LP Instructions Illustration Step 2

MIXING OF CERESIT CT 126

CERESIT CT 126 shall be introduced in the measured volume of clean, clear, cold water and shall be stirred by a paddle mixer until a uniform, lump free mass is obtained. The stirring shall be repeated after 3 - 5 minutes. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

APPLICATION OF CERESIT CT 126

The CERESIT CT 126 Render and skim coat shall polishing plaster coat shall be applied in a uniform layer on the substrate, using the iron trowel. After drying the surface may be polished with abrasive paper. See more details for the application of the product in the Technical Data Sheet. 

Related how to guides

  • Priming for skim coats

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-127/SAP_0201JFC014E2/variation/441901/searchResult.productFields.MainImageAltText}
    CERESIT CT 127
    Finish skim coat for final smoothing, suitable foe indoor and dry areas, free of permanent humidity. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17/SAP_0201JAC014F1/variation/692825/searchResult.productFields.MainImageAltText}
    CERESIT CT 17
    Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-99/SAP_0201JAC014N6/searchResult.productFields.MainImageAltText}
    CERESIT CT 99
    Renovation concentrate for removing fungi, lichens, moss and bacterial contamination, suitable for indoor and outdoor areas. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-7/SAP_0201JAC014K5/searchResult.productFields.MainImageAltText}
    CERESIT CT 7
    Ready-to-use primer for absorbent substrates, suitable for indoor and outdoor application before fixing ceramic tiles. 

Frequently asked questions