Interior plasters & renders
CERESIT CT 22
PLASTER
Cement-lime plaster for machine or manual plastering, suitable for permanently wet areas, indoors and outdoors.
-
For indoor and outdoor use
-
Appropriate for terraces, heated floors and waterproofing
-
Highly stable – also ideal for wall installation
- Description
- How to Use
- FAQ
CERESIT® CT 22 cement-lime plaster is used for machine or manual application of expeditions, plastering primers inside and outside rooms, newly built and renovated buildings. It is also used in rooms exposed to moisture, such as bathrooms, kitchens, laundries, basements, etc. For application on absorbent substrates, and also on raw walls made of ceramic and lime-sand elements and on concrete, cement, cement-lime and gypsum plasters. For single-layer plasters up to 40 mm thick.Available pack size: 30kg.
-
For indoor and outdoor use
-
Appropriate for terraces, heated floors and waterproofing
-
Highly stable – also ideal for wall installation
-
For adhesive layer thicknesses up to 20mm
-
Fibre Force technology
CERESIT CT 22 adheres to all solid, load-bearing, clean, dry and damp surfaces that are free of separating substances. Unstable zones must be completely removed mechanically. The surface must have a rough, porous and non-slip structure.
Pour the contents of the package into a measured amount of clean, cool water and mix until a homogeneous mass is obtained. It is most convenient to mix CERESIT CT 22 using a drill with a mixer or in a concrete mixer. In the case of machine application, mix the plaster in the plastering unit.
Apply the plaster on the prepared substrate with a trowel or plastering unit and smooth it perpendicularly to the direction of application with a metal trowel or a long float. Then, the surface should be carefully levelled (cut) with a trapezoidal batten. After the material has set, depending on the intended end result, it can be trowelled with a foam polystyrene float, then with a felt or fine sponge float.
CERESIT CT 22 can be used especially designed on absorptive substrates such as: cellular concrete, aerated concrete. It can also be used on raw walls made of ceramic and lime-sand elements and on concretes, cement, cement-lime and gypsum plasters.
CERESIT CT 22 can be used especially designed on absorptive substrates such as: cellular concrete, aerated concrete. It can also be used on raw walls made of ceramic and lime-sand elements and on concretes, cement, cement-lime and gypsum plasters.
CERESIT CT 22 can be used especially designed on absorptive substrates such as: cellular concrete, aerated concrete. It can also be used on raw walls made of ceramic and lime-sand elements and on concretes, cement, cement-lime and gypsum plasters.