Skip to Content

CERESIT CS 25 SANITARY SILICONE

  • Trio protection - fungicidal and antimould
  • UV-, ageing- and weather-resistant
  • Waterproof

Features and benefits

High quality water resistant silicone for sealing connection & expansion joints in sanitary facilities.

Properties

Description

CERESIT® CS 25 Sanitary silicone is used for sealing connections for ceramic tiles in the corners, in the places of touching points between walls and floors. CS 25 is highly water resistant and protects joints from water retention and comes in different colour choices to accompany the colour of the tiles and grouts. UV resistant, CS 25 provides excellent adhesion on different material types.Available pack size: 300 ml.

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

SUBSTRATE PREPARATION FOR APPLICATION OF CERESIT CS 25

Before application of CERESIT CS 25 make sure to prepare the substrate and ensure to have it clean, dry, damp-free and cleaned with solvent (glass, aluminium). CS 25 always stays elastic and therefore is recommended for compounds that are active. Joints must be secured with tape so that extra amounts of silicone doesn't go over the joint surface.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CS 25

Cut the tip of the funnel cap according to the width of the joints. CERESIT CS 25 needs to be applied with the silicone gun directly on the joint surface which should be then evened with spatula soaked in the soap and water mixture. After application of CS 25, remove the tape you used for the joint preparation. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

HANDLING CERESIT CS 25 AFTER APPLICATION

After application of CERESIT CS 25, make sure to even the joints within 5 to 10 minutes. Undried material can be removed with solvent and dried parts can be removed only mechanically. CS 25 should be left to dry minimum 30 minutes and maximum 3 hours. 

Related how to guides

  • Chemical anchor in hollow masonry
  • Chemical anchor in concrete

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-ce-40/SAP_0201SGC013M9/searchResult.productFields.MainImageAltText}
    CERESIT CE 40
    Water-resistant, flexible, grout mortar for porcelain, ceramic, glass, natural stones and marble tiles from 1 up to 8 mm width. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-cm-17/SAP_0201SBC013W2/searchResult.productFields.MainImageAltText}
    CERESIT CM 17
    Premium, flexible tile adhesive with high adhesive strength for all kind of tiles on difficult substrates and for large tiles. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-ce-60/SAP_0201SHC016K6/searchResult.productFields.MainImageAltText}
    CERESIT CE 60
    High quality and ready-to-use grout for joints up to 6 mm in width. 100% stable colors, very high dirt and stain resistance. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-ce-43/SAP_0201SGC013N1/searchResult.productFields.MainImageAltText}
    CERESIT CE 43
    Mechanical and water-resistant grout mortar for joints of 1 to 20 mm width, suitable for heated floors and balconies. Perfect for high-traffic areas and wide joints. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-cm-22/SAP_0201SBC013W5/searchResult.productFields.MainImageAltText}
    CERESIT CM 22
    Special tile adhesive for application of large format plates on difficult substrates, suitable for heated floors and balconies. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/sealing/product#/ceresit-cs-42/SAP_0201PPC014D7/searchResult.productFields.MainImageAltText}
    CERESIT CS 42
    Silicone for sealing connection & expansion joints in natural stone & marble coverings, suitable for indoor and outdoor application. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-ce-33/SAP_0201SFC013M4/searchResult.productFields.MainImageAltText}
    CERESIT CE 33
    Fine, high quality grout mortar for non-absorbent tiles and filling wide and narrow tile joints from 1 up to 8 mm width. 

Frequently asked questions