Dry plasters (finishes)
CERESIT CT 137
MINERAL DRY
Decorative thin layer plaster for indoor and outdoor applications. Stone like structure, grain 1.5 mm, 2.0 mm or 2.5 mm.
-
Highly vapour permeable (breathable) and non-inflammable
-
Durable and resistant to weather conditions
-
Naturally resistant to fungi, algae and mould
- Description
- How to Use
- FAQ
CERESIT® CT 137 is used for making thin layer plasters on concrete substrates, traditional plasters, gypsum substrates and gypsum cardboards, gypsum fibre boards. We recommend the application of the plaster CT 137 as façade plaster within CERESIT Ceretherm ETICS with the use of EPS or mineral wool boards. We also recommend performing ceilings’ warming within CERESIT Ceretherm Wool Garage System, with the application of mineral lame wool boards. Available pack size: 25 kg
-
Highly vapour permeable (breathable) and non-inflammable
-
Durable and resistant to weather conditions
-
Naturally resistant to fungi, algae and mould
-
Hydrophobic
-
Possibility of mechanical application
-
Manufactured in white as well as in the option to be painted
CERESIT CT 137 can be applied to carrying substrates that are smooth, dry and clean (free from any substances decreasing adhesion such as grease, bitumen, dust). Absorbent substrates should be primed with the agent CERESIT CT 17, and then painted with CT 16 after minimum 2 hours.
The whole content of the packaging should be poured into the measured amount of clean, cool water and mixed by means of the drill with a mixer until the homogeneous mass without lumps is obtained. Plaster should be evenly applied to the substrate at the thickness of the grain by means of a steel long float held at the angle. Then, it should be given homogenous structure with round movements.
CERESIT CT 137 includes cement, Additionally, when mixed with water, it shows alkaline reaction. Therefore, skin and eyes should be protected. In case of contact with eyes, they should be rinsed with water and a general practitioner should be consulted.
CERESIT CT 137 is used for making thin layer plasters etc. We recommend its application as facade plaster within CERESIT Ceretherm ETICS with the application of an EPS-boards or mineral wool boards. We also recommend performing ceilings’ warming (from the side of ceilings) within CERESIT Ceretherm Wool Garage System, with the application of mineral wool boards.
CERESIT CT 137 is used for making thin layer plasters etc. We recommend its application as facade plaster within CERESIT Ceretherm ETICS with the application of an EPS-boards or mineral wool boards. We also recommend performing ceilings’ warming (from the side of ceilings) within CERESIT Ceretherm Wool Garage System, with the application of mineral wool boards.
CERESIT CT 137 is used for making thin layer plasters etc. We recommend its application as facade plaster within CERESIT Ceretherm ETICS with the application of an EPS-boards or mineral wool boards. We also recommend performing ceilings’ warming (from the side of ceilings) within CERESIT Ceretherm Wool Garage System, with the application of mineral wool boards.