System accessories (mesh, profiles)

CERESIT CT 327
GLASS-FIBRE ARMORING MESH

Reinforcing mesh for Ceresit Ceretherm External Thermal Insulation Composite Systems.

Alkali-resistant
Slipproof
Tearproof

TDS (1)

CERESIT CT 327

en_GL | application/pdf

Find a retailer

We have you covered

Find a retailer

Works Well With

$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-85/SAP_0201IAC014M9/searchResult.productFields.MainImageAltText}$

Adhesive/rendering mortars

CERESIT CT 85

For fixing Expanded Polystyrene (EPS) boards as well as for applying a thin armoured layer for thermal insulation of buildings by means of light wet method.

...
$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-100/SAP_0201IAC014D9/searchResult.productFields.MainImageAltText}$

Adhesive/rendering mortars

CERESIT CT 100

For making a reinforcing layer with glass fibre mesh on Expanded Polystyrene boards (EPS), with ETICS building insulation.

...
$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-79/SAP_0201IDC014M0/searchResult.productFields.MainImageAltText}$

Wet plasters (finishes)

CERESIT CT 79

Highly-elastic decorative thin-layer plaster for outdoor and indoor applications. Elastomeric plaster, stone texture 1,5 mm grain.

...
$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-325/SAP_0201IJC014H2/searchResult.productFields.MainImageAltText}$

System accessories (mesh, profiles)

CERESIT CT 325

Reinforcing mesh for Ceresit Ceretherm External Thermal Insulation Composite Systems.

...

Description
How to Use
FAQ

Product Description

CERESIT® CT 327 is reinforcing and armoring ”panzer” glass fibre mesh for embedding into reinforcing mortars for CERESIT External Thermal Insulation Composite Systems (ETICS). It is preferred to use for facades with higher stress or higher mechanical loads. Available pack size: 0 m width and 25 m length

Alkali-resistant
Slipproof
Tearproof
Improves impact resistance

How to Use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

APPLICATION OF CERESIT CT 327

Embed the glass-fiber mesh vertically into the fresh reinforcing mortar, with overlaps of approx. 10 cm in joint areas, then level the surface. Embed the webbing into the upper third of the reinforcing layer, than cover completely with reinforcing mortar.

IMPORTANT TO NOTE WHEN USING CERESIT CT 327

Please refer also to the technical data sheets of other products in the CERESIT ETICS systems for specific advice on how to prepare the substrate and execute the work.

Frequently asked questions

CERESIT CT 327 is reinforcing and armoring glass fibre mesh for embedding into reinforcing mortars for CERESIT External Thermal Insulation Composite Systems (ETICS). It is recommended to use for facades with higher mechanical loads.

Related How-To Guides

View all

How to apply different types of plasters?

Ensure plaster application and texturing are done corectly.
How to apply architectural concrete plaster?

Make your facade stand out with Visage.
How to fix EPS insulation boards with adhesive mortar?

Tips & Tricks for installing EPS insulation with mortar.
How to fix EPS insulation boards with PU adhesive?

Guidelines to fixing EPS boards with PU adhesive.
How to repair mechanical damages in plastered insulation?

Find out how to fix gaps and gracks in a plastered facade.
How to prepare the substrate for installation of the insulation layer

Inspection and preparation of concrete and brick walls before installation of ETICS
Decorative plaster with visage stone effect

Application of Ceresit CT 710 plaster - Visage Stone Effect - Granite.
How to cope with bio contamination on facade

Bio contamination on facade: cleaning, anti-fungus concentrate, painting

CERESIT CT 327 GLASS-FIBRE ARMORING MESH

Documents