Adhesive/rendering mortars
CERESIT CT 100
IMPACTUM
For making a reinforcing layer with glass fibre mesh on Expanded Polystyrene boards (EPS), with ETICS building insulation.
-
Highly flexible and fibre-reinforced
-
Resistant to extreme mechanical loads and to climatic conditions
-
Highly hydrophobic
- Description
- How to Use
- FAQ
CERESIT® CT 100 is a ready-to-use compound for making a reinforced layer while insulating the external walls of buildings with the use of EPS. It is a component of ETICS CERESIT Ceretherm Impactum system and can also be used for fixing damaged or cracked existing insulation systems. CT 100 is used for applying highly flexible and impact resistant protective reinforced layer while insulating newly constructed buildings and buildings for which thermal efficiency is being improved. Available pack size: 25 kg
-
Highly flexible and fibre-reinforced
-
Resistant to extreme mechanical loads and to climatic conditions
-
Highly hydrophobic
-
Excellent working parameters and high performance
-
Does not require the use of a primer before plaster application
-
Possibility of tinting in mass and of machine application
Before starting work on the reinforced layer, the mortars for gluing the polystyrene foam boards have to be bound. Before application of the reinforced layer, irregularities on the boards should be polished with sandpaper, thoroughly cleaned of the loose remains of the insulation material and the mounting should be performed with appropriate mechanical couplers.
CERESIT CT 100 compound is ready to use. Before starting work, it should be mixed until homogeneous consistency is achieved. Mixed mortar should be spread evenly on the surface of the boards. The fibre glass mesh is immediately spread on the prepared layer and embedded. Correctly embedded fibre glass mesh should be invisible.
The reinforced layer should not be applied on walls exposed to sun and the applied layer should be protected from direct sun, rain and strong wind until it is dry. Works should be carried out in dry conditions, with the air and ground temperature from +10 °C to +25 °C and air humidity below 80 %. Subsequent work stages should not be commenced earlier than after 24-48 hours from finishing of the CERESIT CT 100 compound application.
CERESIT CT 100 mortar is a ready to use compound for making a reinforced layer while insulating the external walls of buildings with the use of EPS. It is a compound of CERESIT Ceretherm Impactum, external thermal insulation composite system for walls of buildings (ETICS). It can also be used for fixing damaged or cracked existing insulation systems. It‘s mostly recommended on facades exposed to damage: entrance to the buildings, parking zones, pedestals, etc.
CERESIT CT 100 can be applied on XPS and EPS boards.
CERESIT CT 100 is present in CERESIT Ceretherm IMPACTUM System