Flex adhesives (powder)
CERESIT CM 16 PRO
FLEXIBLE
Flexible adhesive mortar with AERO technology, suitable for high-traffic areas, balconies and underfloor heating.
-
AERO technology: perfectly aerated, malleable texture
-
MICRO GEL technology: application at high temperatures
-
Recommended for all types of tiles
- Description
- How to Use
- FAQ
CERESIT® CM 16 PRO is a fibre-reinforced tile-adhesive ideal for gluing tiles on balconies, terraces, facades, on underfloor heating. For places exposed to heavy traffic and heavy loads, such as: communication routes, schools, supermarkets, shops, corridors, etc. Available pack sizes: 20kg and 25kg
-
AERO technology: perfectly aerated, malleable texture
-
MICRO GEL technology: application at high temperatures
-
Recommended for all types of tiles
-
For balconies and terraces
-
Customizable consistency
-
Reinforced with Fibre Force fibres - more grip and flexibility
CERESIT CM 16 PRO mortar can be used on load-bearing and dry substrates, free from substances that reduce adhesion (such as: fats, bitumen, dusts).
Pour the contents of the package into a precisely measured amount of clean, cool water and mix with a drill with a mixer until a homogeneous mass is obtained. Wait 5 minutes and mix again. If necessary, add a small amount of water and mix again.
Spread the mortar over the substrate with a notched trowel. The size of the trowel teeth depends on the size of the tiles. Properly selected consistency and size of trowel teeth ensure that a pressed, typical ceramic tile does not flow from the vertical plane, and the mortar covers min. 65% of the PCB mounting surface.
CERESIT CM 16 PRO can be used on cement and cement-lime plasters, cement screeds, cement primers, concrete, aerated concrete.
CERESIT CM 16 PRO can be used on cement and cement-lime plasters, cement screeds, cement primers, concrete, aerated concrete.
CERESIT CM 16 PRO can be used on cement and cement-lime plasters, cement screeds, cement primers, concrete, aerated concrete.