Tiling - after care
CERESIT CE 51
EPOXYCLEAN
Special Cleaner for removing grout stain, residues and soiling from all types of ceramic tiles and natural stones.
-
Concentrate – highly efficient
-
Removes hardened materials and clean deeply the dirt
-
For cleaning a wide range of different types of soiling
- Description
- How to Use
- FAQ
CERESIT® CE 51 Epoxyclean can be used as an undiluted detergent for effective removing stains and residues left by using CERESIT CE 79 and CE 89, as well as removal of stains on polished porcelain stoneware. In addition, it can be used for cleaning application tools and resin of doing the paving work.Available pack size: 1 l
-
Concentrate – highly efficient
-
Removes hardened materials and clean deeply the dirt
-
For cleaning a wide range of different types of soiling
-
Suitable for glass and natural stones
Grout should be sufficiently hardened (min. 24 hours at a temperature of 20 – 25 °C). Big dried resin drops or excess material must be removed mechanically (if the material will be heated it is easier to remove).
Depending on the material and surface apply CERESIT CE 51 diluted or undiluted directly on the surface. Leave the detergent for act round about 10 – 15 minutes. After applying the product rub the surface with some white felt or using a single disc machine with a white disc pad for larger areas.
Collect the cleaning solution using a sponge, rubber squeegee broom or wet vacuum cleaner. Finally rinse well with clean water and dry with a clean rag or cloth.
CERESIT CE 51 is suitable for removal of epoxy mortar stains and residues, also for cleaning almost all surfaces, including impregnated marble, natural stone and ceramics.
CERESIT CE 51 1-component sealing film produces seamless and jointless sealing under ceramic coverings in damp and wet areas indoors (e.g. in private bathrooms, toilets, kitchens).
Use CERESIT CE 51 only in dry conditions and at temperatures of +5 °C to +30 °C.