Epoxy grouts
CERESIT CE 79
ULTRAEPOXY INDUSTRIAL
Two-component chemical-resistant epoxy mortar for installation and grouting of tiles and mosaics with joint width 1 to 15 mm. Ideal for industry, public places and heavy traffic.
-
Extremely easy application and cleaning
-
Available in many uniform colours (high colour stability)
-
Waterproof
- Description
- How to Use
- FAQ
CERESIT® CE 79 is designed to be used in heavy-duty areas that are subject to high chemical and mechanical stresses. Suited for installing and grouting ceramic coverings in areas exposed to aggressive substances, indoors and outdoors. Ideal for high traffic zones and areas exposed to heavy machines as factories, industry, shopping malls and stores. It is also recommended for permanently wet areas and brackish water, swimming pools, pubs, car washes, etc.Available bucket size: 25 kg.
-
Extremely easy application and cleaning
-
Available in many uniform colours (high colour stability)
-
Waterproof
-
Excellent resistance to chemical and mechanical attack
-
No shrinkage and no cracks
-
Available in 6 colours
CERESIT CE 79 adheres to all sound, load-bearing, clean and dry substrates free of substances that may impair adhesion. Prior to grouting, the surface, thin-bed mortar or bedding mortar must have set sufficiently hard and all joints must be uniformly raked to the same depth and width.
Mixing ratios: Component A: 100 parts by weight. Component B: 8 parts by weight. Add the hardener (component B-catalyst) contained in the plastic bag to the resin (component A) and mix with a low speed electric drill and stirrer (approx. 400 rpm) until the mixture is completely free of lumps.
CERESIT CE 79 is applied using the thin-bed method. The notch size of the trowel must be adapted to the respective tile or stone format in accordance with the local norms. The working time, which is identical with the correction time, is approx. 60 minutes at room and container temperatures of +18 °C.
CERESIT CE 79 can be applied on ceramic tiles and stones, acid-resistant bricks, split tiles, chipboards, porcelain, clinker slabs and synthetic resin bonded slabs (Agglo marble etc).
CERESIT CE 79 can be applied on ceramic tiles and stones, acid-resistant bricks, split tiles, chipboards, porcelain, clinker slabs and synthetic resin bonded slabs (Agglo marble etc).
CERESIT CE 79 can be applied on ceramic tiles and stones, acid-resistant bricks, split tiles, chipboards, porcelain, clinker slabs and synthetic resin bonded slabs (Agglo marble etc).