Skip to Content

CERESIT CT 327 GLASS-FIBRE ARMORING MESH

  • Alkali-resistant
  • Slipproof
  • Tearproof

Features and benefits

Reinforcing mesh for Ceresit Ceretherm External Thermal Insulation Composite Systems.

Properties

Description

CERESIT® CT 327 is reinforcing and armoring ”panzer” glass fibre mesh for embedding into reinforcing mortars for CERESIT External Thermal Insulation Composite Systems (ETICS). It is preferred to use for facades with higher stress or higher mechanical loads. Available pack size: 0 m width and 25 m length

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

APPLICATION OF CERESIT CT 327

Embed the glass-fiber mesh vertically into the fresh reinforcing mortar, with overlaps of approx. 10 cm in joint areas, then level the surface. Embed the webbing into the upper third of the reinforcing layer, than cover completely with reinforcing mortar.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

IMPORTANT TO NOTE WHEN USING CERESIT CT 327

Please refer also to the technical data sheets of other products in the CERESIT ETICS systems for specific advice on how to prepare the substrate and execute the work. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-325/SAP_0201IJC014H2/searchResult.productFields.MainImageAltText}
    CERESIT CT 325
    Reinforcing mesh for Ceresit Ceretherm External Thermal Insulation Composite Systems. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-100/SAP_0201IAC014D9/searchResult.productFields.MainImageAltText}
    CERESIT CT 100
    For making a reinforcing layer with glass fibre mesh on Expanded Polystyrene boards (EPS), with ETICS building insulation. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-79/SAP_0201IDC014M0/searchResult.productFields.MainImageAltText}
    CERESIT CT 79
    Highly-elastic decorative thin-layer plaster for outdoor and indoor applications. Elastomeric plaster, stone texture 1,5 mm grain. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-85/SAP_0201IAC014M9/searchResult.productFields.MainImageAltText}
    CERESIT CT 85
    For fixing Expanded Polystyrene (EPS) boards as well as for applying a thin armoured layer for thermal insulation of buildings by means of light wet method. 

Frequently asked questions