CERESIT CT 16 QUARZ CONTACT

  • Improves the adhesion between ETICS system layers
  • Low absorbency and vapour permeability
  • Easier application of plasters

Features and benefits

Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters.

Properties

Description

CERESIT® CT 16 facilitates the application of thin-layer plasters and renderings inside and outside the buildings. It is recommended for priming the reinforced layers within CERESIT Ceretherm ETICS and traditional plasters. CT 16 can be applied to the surfaces of chipboards, gypsum cardboards, gypsum plasters, all types of concrete and strong paint coats. Available pack size: 10 l

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

CERESIT CT 16 SUBSTRATE PREPARATION

The substrates to be coated with the paint CERESIT CT 16 should be smooth, even, dry and free from any substances that decrease adhesion: grease, bitumen, dust, etc. The absorptive substrates, e.g. gypsum plasters, chipboards, non-impregnated gypsum cardboards should be primed with the agent CERESIT CT 17 and then left for drying for approx. 2 hours.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CT 16

The content of the packing should be stirred. Neither rusty containers nor tools should be used. Do not dilute the paint! There is recommended to apply one even layer CERESIT CT 16 using roller or brush. Drying time is approx. 3 hours. Tools and fresh stains should be washed with water. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

CERESIT CT 16 PRIMER - ADHERENCE AND WEATHER CONDITIONS

The priming paint should be applied in the ambient temperature and that of the substrate from +5 °C to +25 °C and the humidity below 80 %. In case of contact with eyes, they should be rinsed with water and a general practitioner should be consulted. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-174/SAP_0201IDC014F2/searchResult.productFields.MainImageAltText}
    CERESIT CT 174
    Decorative thin layer plaster for indoor and outdoor applications, stone like structure, grain 1.5 mm or 2 mm. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/central-pdp#/ceresit-ct-29/SAP_0201JDC014G9/searchResult.productFields.MainImageAltText}
    CERESIT CT 29
    Grey, mineral filler to repair traditional plasters and thin-layer “putties” inside and outside the buildings. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/central-pdp#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}
    CERESIT CT 17
    Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-thermo-universal/SAP_0201IAC015R0/searchResult.productFields.MainImageAltText}
    CERESIT THERMO UNIVERSAL
    Reinforcing Rendering Mortar - Basic coating XPS, EPS, MW. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-60/SAP_0201IDC014K0/searchResult.productFields.MainImageAltText}
    CERESIT CT 60
    Decoractive thin layer plaster with stone structure and grain size of 1.5 mm, 2.0 mm or 2.5 mm for indoor and outdoor applications. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-85/SAP_0201IAC014M9/searchResult.productFields.MainImageAltText}
    CERESIT CT 85
    For fixing Expanded Polystyrene (EPS) boards as well as for applying a thin armoured layer for thermal insulation of buildings by means of light wet method. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-74/SAP_0201IDC014L4/searchResult.productFields.MainImageAltText}
    CERESIT CT 74
    Decorative thin-layer plaster for indoor and outdoor applications, stone structure, grain 1.5, 2.0 or 2.5 mm 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-190/SAP_0201IAC014F9/searchResult.productFields.MainImageAltText}
    CERESIT CT 190
    For fixing Mineral Wool boards as well as for applying a thin-armoured layer for thermal insulation of buildings in ETICS systems. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-76/SAP_0201IDC014L6/searchResult.productFields.MainImageAltText}
    CERESIT CT 76
    Decorative thin-layer plaster with increased UV protection for indoor and outdoor applications. Stone like structure with grane size of 1.5 mm or 2 mm. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-110/SAP_0201IFC016D2/searchResult.productFields.MainImageAltText}
    CERESIT CT 110
    Solar Protect facade paint is an optimal combination of state of the art ingredients, which provide outstanding performance and resistance. 

Frequently asked questions

CERESIT CT 16 facilitates the application of thin-layer plasters and renderings inside and outside the buildings. It is recommended for priming the reinforced layers within CERESIT Ceretherm ETICS and traditional plasters.

CERESIT CT 16 can be applied to the surfaces of chipboards, gypsum cardboards, gypsum plasters, all types of concrete and strong paint coats.

CERESIT CT 16 is present in CERESIT POPULAR System, AQUASTATIC System, SELF CLEAN System, SOLAR PROTECT System, IMPACTUM System, VISAGE System