Skip to Content

CERESIT CT 175 SILICATE SILICONE AQUASTATIC

  • Hydrophobic and resistant to dirt
  • Vapour permeable
  • Low water absorption

Features and benefits

Decorative thin-layer plaster for indoor and outdoor applications, woodworm like structure, grain 2 mm.

Properties

Description

CERESIT® CT 175 combines good points of silicate plaster and silicone plaster. It is vapour permeable, of low absorbability and dirt resistant. CT 175 is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards. It is recommended the application of CT 175 as facade plaster within CERESIT ETICS with the application of EPS-boards or MW. CT 174 is protected form biological paralyses. Available pack size: 25 kg.

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

CERESIT CT 175 PLASTER MIXING AND SUBSTRATE PREPARATION

CERESIT CT 175 can be applied to smooth, carrying, dry and clean substrates free from grease, bitumen, dust and other substances decreasing adhesion. Uneven and damaged substrates should be first smoothed and repaired. The existing dirt, layers of low-strength, elastic, lime and adhesive paint coatings should be removed. CT 175 can be applied when the priming paint CT 16 becomes completely dry.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CT 175

CERESIT CT 175 should be evenly applied on the substrate at the thickness of the grain by means of a steel long float held at the angle. Depending on the type of the float movement, it is possible to obtain the structure features resulting from the grain in plaster. Work should be done on one surface without breaks, keeping the same product consistency. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

IMPORTANT TO NOTE WHEN USING CERESIT CT 175

Application should be performed in the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. This product should not be mixed with other plasters, pigments, resins and binders. The rooms in which the plaster has been applied should be ventilated to eliminate the smell before they are used. In case of contact with eyes, they should be rinsed with water. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-16/SAP_0201IGC014E8/searchResult.productFields.MainImageAltText}
    CERESIT CT 16
    Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17-transparent/SAP_0201JAC016G7/searchResult.productFields.MainImageAltText}
    CERESIT CT 17 TRANSPARENT
    Deep penetrating, quick-drying primer for surface reinforcement of all absorbent substrates, suitable for indoor and outdoor areas. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-85/SAP_0201IAC014M9/searchResult.productFields.MainImageAltText}
    CERESIT CT 85
    For fixing Expanded Polystyrene (EPS) boards as well as for applying a thin armoured layer for thermal insulation of buildings by means of light wet method. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}
    CERESIT CT 17
    Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-75/SAP_0201IDC014L5/searchResult.productFields.MainImageAltText}
    CERESIT CT 75
    Decorative thin-layer plaster for indoor and outdoor applications, woodworm structure, grain 2 mm. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-15/SAP_0201IGC014E6/searchResult.productFields.MainImageAltText}
    CERESIT CT 15
    Silicate dispersion composition of potassium and acrylic to prime the substrates for thin layer silicate plasters, putties and paint coats. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-84-express-plus/SAP_0201ICC014M8/searchResult.productFields.MainImageAltText}
    CERESIT CT 84 EXPRESS PLUS
    For EPS and MW boards, for thermal insulation of buildings in ETICS systems. Especially recommended for work in low-temperature when cement adhesives drying time is significantly longer. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-174/SAP_0201IDC014F2/searchResult.productFields.MainImageAltText}
    CERESIT CT 174
    Decorative thin layer plaster for indoor and outdoor applications, stone like structure, grain 1.5 mm or 2 mm. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-thermo-universal/SAP_0201IAC015R0/searchResult.productFields.MainImageAltText}
    CERESIT THERMO UNIVERSAL
    Reinforcing Rendering Mortar - Basic coating XPS, EPS, MW. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-80/SAP_0201IAC014M1/searchResult.productFields.MainImageAltText}
    CERESIT CT 80
    For fixing Expanded Polystyrene boards, XPS and mineral wool boards as well as for applying a thin-reinforced layer for thermal insulation of buildings by means of ETICS. 

Frequently asked questions