CERESIT CN 175

Features and Benefits

For layers of 3 - 60 mm in one single application

Properties

  • Virtuality tension free
  • Smooth surface
  • Ready for foot traffic in 6-8 hours (depending on layer's thickness)
  • Low dust formation during tempering
  • Comfortable and easy in application
  • Suitable for weak basis
  • Suitable for joint-free heated floors
  • Suitable for dry indoor premises
  • Environmentally safe

Read More

Ceresit CN 175 self levelling compound is to be used for levelling horizontal concrete, cement-sand and other mineral bases, including heated ones, and also sand asphalt bases. The compound ist applied as basis for floor coverings in dry indoor premises, and can be used for repair of basis. Thickness of Ceresit CN 175 self-levelling compound layer is not to be exceeded 3-60 mm per one time. Ceresit CN 175 is not to be used for industrial floors and should be used for indoor areas only.

Documents and Downloads

Technical Data Sheet
CERESIT CN 175
Download TDS

Step by step

Step 1

The substrates must be clean, crack-free, sound, dry, free of substances that may impair adhesion and must comply with the current relevant local standards. 

Step 2

Mix CN 175 with clean, clear water (amount: see Technical Data). Stir with an electric drill and agitator attachment at approx. 600 rpm until the mixture is completely free of lumps.

Step 3

Pour the levelling compound on the floor and spread it with a broom, smoothing trowel or squeegee. Afterwards use a spiked roller to release any entrapped air. If mixed in batches, apply the batches immediately wet-in-wet.

DISCOVER MORE

Fibre Force Floors

6 Rules for perfect floor

 

6 Benefits of self-levelling compounds

Related Products/Systems

VISIT OUR LOCAL PAGES   

   

  • Ceresit Russia

    Read More