Name: CERESIT DG
Brand: CERESIT

Leveling compounds-thick layers/screeds

Self-levelling compound for layers of 3 - 30 mm in one single application, suitable for dry indoor areas.

Excellent self-levelling properties
Resistant to castors
Suitable for joint-free heated floors

TDS (1)

CERESIT DG

en_GL | application/pdf

Find a retailer

We have you covered

Find a retailer

Works Well With

$${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}$

Universal primers

CERESIT CT 17

Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards.

...
$${/content/heliux/adhesive/ceresit/com/en/products/flooring/product#/ceresit-rs-88/SAP_0201TCC015M9/searchResult.productFields.MainImageAltText}$

Leveling compounds - specialties

CERESIT RS 88

Levelling compound for layers of 0.5 – 10 mm in one single application, suitable for concrete floors.

...
$${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-cm-17/SAP_0201SBC013W2/searchResult.productFields.MainImageAltText}$

Flex adhesives (powder)

CERESIT CM 17

Premium, flexible tile adhesive with high adhesive strength for all kind of tiles on difficult substrates and for large tiles.

...
$${/content/heliux/adhesive/ceresit/com/en/products/flooring/product#/ceresit-r-777/SAP_0201TNC015M2/variation/2144051/searchResult.productFields.MainImageAltText}$

Flooring primers

CERESIT R 777

Dispersion primer for absorbent screeds and concrete floors, suitable for directly bonding floor coverings.

...
$${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-cl-51/SAP_0201SKC013R0/searchResult.productFields.MainImageAltText}$

1-component sealing (disp./cement.)

CERESIT CL 51

Flexible one-component sealing film for application under tiles and slabs, suitable for domestic wet areas indoors.

...
$${/content/heliux/adhesive/ceresit/com/en/products/flooring/product#/ceresit-r-766/SAP_0201TNC015M1/variation/2146102/searchResult.productFields.MainImageAltText}$

Flooring primers

CERESIT R 766

For absorbent and non-absorbent substrates, ensuring the adhesion of self-levelling compounds or repair mortars to the substrate.

...
$${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-cm-16/SAP_0201SBC013T8/searchResult.productFields.MainImageAltText}$

Flex adhesives (powder)

CERESIT CM 16

Tile adhesive mortar for ceramic tiles, suitable for wet areas, walls and floors, inside and outside.

...

Description
How to Use
FAQ

Product Description

CERESIT® DG self-levelling compound is used for levelling horizontal concrete, cement-sand, sand asphalt and other (mineral) substrates, including heated ones. The compound is applied as a substrate for floor coverings in dry indoor areas. Do not apply CERESIT DG in layers exceeding 3 to 30 mm per application. When a layer thickness of 30 to 80 mm is required, mix CERESIT DG with 30% aggregate (sand). Do not use CERESIT DG for producing industrial floors. Only for indoor use. Available pack size: 25 kg

Excellent self-levelling properties
Resistant to castors
Suitable for joint-free heated floors
Not suitable on a wearing surface
Environmentally compatible

How to Use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

SUBSTRATE PREPARATION FOR APPLICATION OF CERESIT DG

Before application of CERESIT DG make sure to prepare basis. Basis shall be solid, thick, clean and dry, without any visible damages.

MIXING OF CERESIT DG

Dry mixture is to be tempered with exact amount of clean cold water (+15 to +20 °C) – 5.5 l to 6.0 l per 25 kg of dry mixture. Dry mixture is gradually poured in water and stirred to a smooth paste without balls with the help of a low speed stirrer.

APPLICATION OF CERESIT DG

Then a 3 min technological break is to be done for preliminary maturing of the mixture and stir it again. The surface of the freshly-poured mixture is to be rolled with a needled-roller for removing air bubbles. Turbo-pump or screw pumps might be used for mixture pouring.

Frequently asked questions

The compound is applied as a substrate for floor coverings in dry indoor areas. Do not use CERESIT DG for producing industrial floors. Only for indoor use.

Looking to Upgrade?

$${/content/heliux/adhesive/ceresit/com/en/products/flooring/product#/ceresit-r-777/SAP_0201TNC015M2/variation/2144051/searchResult.productFields.MainImageAltText}$

Flooring primers

CERESIT R 777

Dispersion primer for absorbent screeds and concrete floors, suitable for directly bonding floor coverings.

...
$${/content/heliux/adhesive/ceresit/com/en/products/flooring/product#/ceresit-r-766/SAP_0201TNC015M1/variation/2146102/searchResult.productFields.MainImageAltText}$

Flooring primers

CERESIT R 766

For absorbent and non-absorbent substrates, ensuring the adhesion of self-levelling compounds or repair mortars to the substrate.

...

Related How-To Guides

View all

How to prepare floor for self levelling compound application

Prepare self levelling compound
How, when and why use primers in flooring jobs

Right primer in flooring works

Documents