Leveling compounds - thin layers
CERESIT CN 69
NIVEL SUPER
Self-levelling compound for medium traffic loads in 2 to 10 mm layer thickness for indoor application
-
Ensures a smooth, homogenous surface
-
Shrinkage free
-
Crack free
- Description
- How to Use
- FAQ
CERESIT® CN 69 is a self-levelling compound for producing norm-conforming substrates before covering them with final floor covering materials. CERESIT CN 69 is suitable for concrete, cement-sand and other mineral bases to create smooth surface ready to receive textile, lamella, PVC, lino coverings as well as ceramic tiles. Also suitable for heated floors. CERESIT CN 69 is recommended for dry indoor areas.Available pack size: 25 kg
-
Ensures a smooth, homogenous surface
-
Shrinkage free
-
Crack free
-
Suitable for mechanical application
-
Suitable for application on heated floors
-
Only for indoor applications - dry surfaces
The substrates must be clean, crack-free, sound, dry, free of substances that may impair adhesion and must comply with the current relevant local standards.
Mix CERESIT CN 69 with clean, clear water (amount: see Technical Data). Stir with an electric drill and agitator attachment at approx. 600 rpm until the mixture is completely free of lumps.
Pour the levelling compound on the floor and spread it with a broom, smoothing trowel or squeegee. Afterwards use a spiked roller to release any entrapped air. If mixed in batches, apply the batches immediately "wet-in-wet".
It shall be applied in layers up to 10 mm thick in order to achieve a perfectly plane surface prior to laying a glued carpet, laminated floor, PVC carpet, linoleum or ceramic tiles.
CERESIT CN 69 is recommended for dry indoor areas. Also suitable for heated floors.
Only carry out floor installation work if the floor temperature is above 15 °C, air temperature above 18 °C and relative humidity below 75 %.