CERESIT IN 46

Features and Benefits

White "ready to use" skimming coat to be used as the final finishing layer under paint coats and wallpapers

Properties

  • Optimal hardness and elasticity
  • High strengh
  • Machine application possible
  • Easy to grind
  • Ideal for paint coats
  • Good adhesion 
  • Resistant to lamination 
  • Resistant to yellowing in sunlight
  • Surfaces finished with the coat can bepainted with any kind of paint
  • For indoor use

Read More

The ready-to-use fi nish skim coat Ceresit IN 46 is used to achieve white and smooth wall and ceiling surfaces to be finished with paint coats and wallpapers. After setting completely, it creates a durable, solid and stable substrate. Thanks to the use of the 1nSure technology and special SMART POLYMER fi llers, a perfectly smooth and resistant surface can be achieved. The material is ready for use, it is easily applied and processed.

How to apply  

Step 1

Ceresit IN 46 can be applied on load-bearing substrates that are dry and free from grease, bitumen, dust, loose plaster grains and other substances decreasing adhesion. Any stains and layers of poor strength shall be completely removed. This also applies to any anti-adhesion substances and paint coats. 

Step 2

White render & finish skim coat Ceresit IN 46 is ready for use. After opening, the content of the package shall be thoroughly mixed with a mixing paddle. If necessary, increase the quantity of water by approx. 2 % for a package and mix again. For mechanical application, the water addition will be approximatly 4 %.

Step 3

The material shall be applied on the surface with a metal fl oat. After application, the material shall be smoothed using a wide metal fl oat made of stainless steel and left to dry. After the hardening of the material, the surface is ready for smoothing with sandpaper or a grinding mesh and a so-called giraffe grinder. See more details for the application of the product in the Technical Data Sheet.

Visit our local pages