Ceretherm Self Clean

Insulates and keeps facade dry and clean

Advanced insulation system with self-cleaning properties, vapour permeable and highly resistant to water uptake and aggressive dirt.

 

Characteristics:

  • Self cleaning
  • Dirt and water uptake resistant
  • Vapour permeable & hydrophobic
  • Resistant to aggressive dirts
  • Highly resistant to biological contamination like fungi and algae
  • Highly flexible & durable
  • Resistant to thermal stresses and cracks
  • Excellent application parameters
  • Certification: ETA Ceresit Ceretherm Classic

Recommended for:

Buildings where more advanced insulation system can better resist to water, dirt pick up and make facade dry and clean for longer.

1. Fixing*

Ceresit CT 83 Strong Fix Adhesive Mortar or Ceresit CT 85 Flex Adhesive and Reinforcing Mortar, plastic anchors or anchors with a steel core classified as ETAG 014, number of fasteners and their arrangement should be determined by an architect, based on the substrate analysis and load calculations

2. Insulation material

EPS-boards classified as EN 13163, with thickness up to 42 cm

3. Reinforced layer*

Ceresit CT 85 Flex Adhesive and Reinforcing Mortar, and Ceresit CT 325 glass fibre mesh

4. Priming paint

Ceresit CT 16 Priming paint

5. Plaster

Ceresit CT 74, CT 75 Silicone Self Clean, silicone plasters

6. Paint

Ceresit CT 48 Silicone Self Clean, silicone paint
Ceresit CT 49 Nanosilicone Reno, nanosilicone paint

 

* Optionally you can use as an adhesive and rendering mortars Thermouniversal or CT80 covered by ETA documents ETA Ceresit Ceretherm Universal

Supported by technologies:

Design and colouristic pallets: