Skip to Content

Fibre force etics

Look at fiber force video!

You need to accept cookies to play this video

Fibre Force Features & Benefits

Fibre Force ETICS Benefits

  • Reinforced matrix with 3D Fibre structure
  • Increased durability & high impact resistance
  • High flexibility against thermal tensions and stresses
  • Improved post-cracking behavior and reduced microcracks

Find out more

  • The fibres create a reinforced rigid cementitious matrix structure of the rendering mortar.

  • The reinforced matrix is more flexible and less susceptible against thermal tensions (high variations in temperatures). 
  • Fibre Force specific three-dimensional matrix gives excellent flexibility and elasticity.

  • Additional 3D structure (created by Fibre Force) helps to dissipate impact and compensates stress derived from external factors (like large temperature variations over 90°C).
  • It prevents the formation of cracks, micro scratches and improves the post-cracking behavior by mechanical bonding the microcracked material and blocking further crack propagation. 

  • Easy mixing! Smooth homogeneous mass with high plasticity. 
  • Water retention is optimized, which allows for perfect embedding of glass fibre, it is especially important while working on large facade surfaces or during challenging temperature and humidity conditions. 

  • Extended durability of the entire system, which means resistance to thermal tensions, mechanical impacts and humidity effects.

  • Being finished with CT 74, CT 75 Silicone Self Clean plasters or CT 174, CT 175 Silicate-Silicone Aquastatic plasters, the system becomes:
  • More flexible and weather-proof
  • More resistant to external factors such as high temperature amplitudes or humidity conditions. 
  • Higher durability and impact resistance.
  • High resistance to microcracks formation and stresses.
  • In Ceresit Self Clean or Aquastatic systems with Fibre Force technology renders CT 85 or CT 190 and Double Dry technology-based plasters one can go with darker colour choice with HBW/LRV = 18% and above. Which would not be advised for similar system without Fibre Force.

Unique combination of fibres stopping microcrack in rendering mortar

The dispersed fibres are well anchored in the cementitious matrix of the mortar and this way designed to suppress crack propagation and to transfer some of the internal forces after scratching. Where the scratch has been retained by the fibre, it ensures material integrity.

FibreForce ETICS Unique Combination


  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-87/SAP_0201IAC014N2/searchResult.productFields.MainImageAltText}
    For fixing Expanded Polystyrene (EPS) boards, Mineral Wool boards and for applying a thin armoured layer for thermal insulation of buildings in ETICS systems. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-85/SAP_0201IAC014M9/searchResult.productFields.MainImageAltText}
    For fixing Expanded Polystyrene (EPS) boards as well as for applying a thin armoured layer for thermal insulation of buildings by means of light wet method. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-190/SAP_0201IAC014F9/searchResult.productFields.MainImageAltText}
    CERESIT CT 190
    For fixing Mineral Wool boards as well as for applying a thin-armoured layer for thermal insulation of buildings in ETICS systems. 

Have a question?

We are happy to support you with any questions regarding our products, where to buy, or what is the right solution for your project.