Wet plasters (finishes)
CERESIT CT 175
SILICATE SILICONE AQUASTATIC
Decorative thin-layer plaster for indoor and outdoor applications, woodworm like structure, grain 2 mm.
-
Hydrophobic and resistant to dirt
-
Vapour permeable
-
Low water absorption
- Description
- How to Use
- FAQ
CERESIT® CT 175 combines good points of silicate plaster and silicone plaster. It is vapour permeable, of low absorbability and dirt resistant. CT 175 is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards. It is recommended the application of CT 175 as facade plaster within CERESIT ETICS with the application of EPS-boards or MW. CT 174 is protected form biological paralyses. Available pack size: 25 kg.
-
Hydrophobic and resistant to dirt
-
Vapour permeable
-
Low water absorption
-
Resistant to weather conditions and damage
-
BioProtect formula: resistant to fungi, algae, moul
CERESIT CT 175 can be applied to smooth, carrying, dry and clean substrates free from grease, bitumen, dust and other substances decreasing adhesion. Uneven and damaged substrates should be first smoothed and repaired. The existing dirt, layers of low-strength, elastic, lime and adhesive paint coatings should be removed. CT 175 can be applied when the priming paint CT 16 becomes completely dry.
CERESIT CT 175 should be evenly applied on the substrate at the thickness of the grain by means of a steel long float held at the angle. Depending on the type of the float movement, it is possible to obtain the structure features resulting from the grain in plaster. Work should be done on one surface without breaks, keeping the same product consistency.
Application should be performed in the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. This product should not be mixed with other plasters, pigments, resins and binders. The rooms in which the plaster has been applied should be ventilated to eliminate the smell before they are used. In case of contact with eyes, they should be rinsed with water.
CT 175 is used for making thin-layer plasters in insulation systems. We recommend its application as a facade plaster within CERESIT ETICS with the application of EPS-boards or mineral wool. CT 175 plaster recommended to be applied to external walls where high permeability is required together with very low water absorption and high dirt resistance.
CT 175 is used for making thin-layer plasters in insulation systems. We recommend its application as a facade plaster within CERESIT ETICS with the application of EPS-boards or mineral wool. CT 175 plaster recommended to be applied to external walls where high permeability is required together with very low water absorption and high dirt resistance.
CT 175 is used for making thin-layer plasters in insulation systems. We recommend its application as a facade plaster within CERESIT ETICS with the application of EPS-boards or mineral wool. CT 175 plaster recommended to be applied to external walls where high permeability is required together with very low water absorption and high dirt resistance.
Our Eco Buckets are made of polypropylene and can be recycled.
We incorporate post-consumer recycled plastic (PCR) into our Eco Buckets, reducing carbon emissions.
Ceresit's commitment to sustainability extends beyond Tiling products. Now, our Facade Solutions also benefit from Eco Bucket with packaging made from up to 62% recycled plastic.