- Self-cleaning
- Highly durable and dirt resistant
- Very low water absorption and high vapor permeability
-
Self-cleaning
-
Highly durable and dirt resistant
-
Very low water absorption and high vapor permeability
-
Thixotropic
-
Highly resistant to UV and weather conditions
-
Bio Protect formula – highly resistant to fungi, algae, etc.
CERESIT® CR 50 is formulated with selected binders together with special fillers and pigments. Absorption of water and dirt is strongly limited, nevertheless the coating is highly permeable to water vapor. CR 50 is dedicated to be used outdoor and indoor, especially recommended for protecting of coated areas against weathering, biological corrosion and in cases where high durability, dirt-pickup resistance, elasticity and abrasion resistance of the surface is required. Available pack size: 15 l and 3,5 l
CERESIT CR 50 may be applied on carrying, smooth, dry and clean substrates. Firstly uneven and damaged substrates should be repaired. Plaster filler Ceresit CR 64 can be used for repairs. It is recommended to check the strength of the existing mineral layers. The existing dirt, layers of low strength, lime and adhesive paint coatings as well as the residuals of wall paper or glues should be completely removed. It is recommended to use washing devices with the use of CT 98 agent for removing impurities. After being washed with water, the substrate should dry.
Before the paint application, the content of the container should be carefully stirred by means of the drill with a mixer for about 2 minutes. Usually it is sufficient to paint twice. Between the application of the subsequent layers at least 12- to 24-hour technological breaks should be maintained. CR 50 should be applied by means of a brush, roller or a spray device. It is important to apply the paint evenly. Application with spray machine using pressure machines is feasible. If there is such a need, it is possible to add not more than 5% of water and stir carefully.
Application should be performed in dry conditions with the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. The paint may cause discoloration impossible to be removed, therefore all the elements in contact with CR 50 should be protected. Skin and eyes should be protected. Protective gloves and glasses should be worn while applying the paint.
CERESIT CR 50 is dedicated to be used outdoor and indoor, especially recommended for protecting of coated areas against weathering (e.g. sour rain), biological corrosion and in cases where high durability and dirt-pickup resistance as well as elasticity and abrasion resistance of the surface is required.
CERESIT CR 50 can be applied on the mineral substrates (concrete, cement plasters, lime–cement and lime plasters, gypsum, etc.).
CERESIT CR 50 is present in CERESIT Renovation System