CERESIT CT 327 GLASS-FIBRE ARMORING MESH

Alkali-resistant

Slipproof

Tearproof

Find a retailer

Features and benefits
Documents and downloads
How to use
Related how to guides
Related products
Frequently asked questions

Features and benefits

Reinforcing mesh for Ceresit Ceretherm External Thermal Insulation Composite Systems.

Properties

Alkali-resistant
Slipproof
Tearproof
Improves impact resistance

Description

CERESIT® CT 327 is reinforcing and armoring ”panzer” glass fibre mesh for embedding into reinforcing mortars for CERESIT External Thermal Insulation Composite Systems (ETICS). It is preferred to use for facades with higher stress or higher mechanical loads. Available pack size: 0 m width and 25 m length

Documents and downloads

ceresit global ct327 tds

en_GL |

application/pdf

How to use

APPLICATION OF CERESIT CT 327

Embed the glass-fiber mesh vertically into the fresh reinforcing mortar, with overlaps of approx. 10 cm in joint areas, then level the surface. Embed the webbing into the upper third of the reinforcing layer, than cover completely with reinforcing mortar.

IMPORTANT TO NOTE WHEN USING CERESIT CT 327

Please refer also to the technical data sheets of other products in the CERESIT ETICS systems for specific advice on how to prepare the substrate and execute the work.

Related how to guides

How to apply different types of plasters?
How to apply architectural concrete plaster?
How to fix EPS insulation boards with adhesive mortar?
How to fix EPS insulation boards with PU adhesive?
How to repair mechanical damages in plastered insulation?
How to prepare the substrate for installation of the insulation layer
Decorative plaster with visage stone effect
How to cope with bio contamination on facade

View all

Related products

$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-325/SAP_0201IJC014H2/searchResult.productFields.MainImageAltText}$

CERESIT CT 325

Reinforcing mesh for Ceresit Ceretherm External Thermal Insulation Composite Systems.
$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-100/SAP_0201IAC014D9/searchResult.productFields.MainImageAltText}$

CERESIT CT 100

For making a reinforcing layer with glass fibre mesh on Expanded Polystyrene boards (EPS), with ETICS building insulation.
$${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-79/SAP_0201IDC014M0/searchResult.productFields.MainImageAltText}$

CERESIT CT 79

Highly-elastic decorative thin-layer plaster for outdoor and indoor applications. Elastomeric plaster, stone texture 1,5 mm grain.

Find a retailer

Frequently asked questions

CERESIT CT 327 is reinforcing and armoring glass fibre mesh for embedding into reinforcing mortars for CERESIT External Thermal Insulation Composite Systems (ETICS). It is recommended to use for facades with higher mechanical loads.

CERESIT CT 327 can be applied on top of the insulation layer of EPS or mineral wool.

CERESIT CT 327 is present in CERESIT Ceretherm IMPACTUM System