CERESIT® CT 35 is used for making thin layer plasters on concrete substrates, traditional plasters, gypsum substrates and gypsum cardboards, gypsum fi bre boards, etc. We recommend the application of CT 35 as façade plaster within CERESIT Ceretherm ETICS and Ceretherm Wool with the application of EPS boards or façade boards based on mineral wool. CT 35 is manufactured in several colours to be applied as the final layer of the facade as well as in the option to be painted. Available pack size: 25 kg
CERESIT CT 35 can be applied on carrying substrates that are smooth, dry and clean. Absorbent substrates should be primed with the agent CT 17, and then painted with CT 16 after minimum 2 hours. The layer of the plaster CT 35 is recommended to be applied the next day after the substrate is primed.
The content of the packaging should be poured into the clean, cool water and mixed by means of the drill with a mixer until the homogeneous mass without lumps is obtained. Plaster should be evenly applied on the substrate at the thickness of the grain by means of a steel long float held at the angle. Then, it should be given homogenous structure. Do not sprinkle plaster with water!
Skin and eyes should be protected since CERESIT CT 35 includes cement. Additionally, while mixed with water, it shows alkaline reaction. In case of contact with eyes, they should be rinsed with water and a general practitioner should be consulted.
CERESIT CT 35 is used for making thin layer plasters. We recommend the application of the plaster CT 35 as a facade plaster within CERESIT Ceretherm ETICS with the application of EPS-boards or facade mineral wool boards.
CERESIT CT 35 can be applied on concrete substrates, traditional plasters, gypsum substrates and gypsum cardboards, gypsum-fibre boards, etc
CERESIT CT 35 is present in CERESIT Ceretherm AERO WOOL System