CERESIT CT 49 NANO SILICONE RENO

  • Self-cleaning and dirt-resistant
  • Low-water absorption and high vapour permeability
  • Tixotropic

Features and benefits

Highly hydrophobic, vapour permeable paint for buildings’ facades and interiors.

Properties

Description

CERESIT® CT 49 nano-silicone paint is made of selected modified silicone, polysiloxane resins and special fillers and pigments. The coat is highly permeable to water vapour, but absorption of water and dirt is strongly limited. It can be used on the mineral substrates that have never been painted before and for painting CERESIT. It is highly recommended in historical objects, on the renovation and aerated plasters, where aesthetic qualities and duration of the coating is required. Available pack size: 15 l

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

CERESIT CT 49 SUBSTRATE PREPARATION

CERESIT CT 49 application should be performed in dry conditions with the ambient and substrate temperature ranging from +5 °C to +25 °C and the. Firstly uneven and damaged substrates should be repaired. It existing dirt, layers of low strength, lime and adhesive paint coatings as well as the residuals of wall paper or glues should be completely removed. After being washed with water, the substrate should be dry.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CT 49

Before the paint application, the content of the container should be carefully stirred by means of a drill with a mixer for about 2 minutes. Between the application of the subsequent layers at least 12- to 24-hour technological breaks should be maintained. CERESIT CT 49 should be applied evenly by means of a brush, roller or a spray device. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

IMPORTANT TO NOTE WHEN USING CERESIT CT 49

Application should be performed in dry conditions with the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. The paint may cause discoloration impossible to be removed on glass, ceramic, wooden, metal and stone surfaces. Skin and eyes should be protected. Protective gloves and glasses should be worn while applying the paint. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/central-pdp#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}
    CERESIT CT 17
    Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-110/SAP_0201IFC016D2/searchResult.productFields.MainImageAltText}
    CERESIT CT 110
    Solar Protect facade paint is an optimal combination of state of the art ingredients, which provide outstanding performance and resistance. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-16/SAP_0201IGC014E8/searchResult.productFields.MainImageAltText}
    CERESIT CT 16
    Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-76/SAP_0201IDC014L6/searchResult.productFields.MainImageAltText}
    CERESIT CT 76
    Decorative thin-layer plaster with increased UV protection for indoor and outdoor applications. Stone like structure with grane size of 1.5 mm or 2 mm. 

Frequently asked questions

CERESIT CT 49 is used outdoor and indoor, for buildings’ façades and interiors. For use in areas open for biological contamination (fungi, algae, etc.). It can be applied on the mineral substrates (concrete, cement plasters, lime–cement plasters and lime plasters) that have never been painted before.

CERESIT CT 49 can be applied on the mineral substrates: concrete, cement plasters, lime–cement and lime plasters, gypsum.

CERESIT CT 49 is present in CERESIT Ceretherm SELF CLEAN System